|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-25-2018, 05:05 PM | #1 |
Senior Member
Join Date: Nov 2013
Posts: 309
|
collision subrail damage / change in wood blocks
hello- 1930 roadster A- see pix- after brazing repair and home made piece, standard blocks won't fit--i'm going to need to make some home made individualized blocks; so ques: what is standard distance from top of transverse rail to top of subrail? thank you
Last edited by wbs; 11-25-2018 at 05:09 PM. Reason: . |
11-25-2018, 06:37 PM | #2 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
|
Re: collision subrail damage / change in wood blocks
There is a sill piece made to replace that area
My assessment is you should start over and replace the portion of the sill. It looks warped et al Not an answer to your question in your post but MHO I don't have the dimensions sorry |
Sponsored Links (Register now to hide all advertisements) |
|
11-26-2018, 12:06 PM | #3 |
Senior Member
Join Date: Nov 2013
Posts: 309
|
Re: collision subrail damage / change in wood blocks
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|