Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-03-2019, 06:47 PM   #1
Eighty
Member
 
Eighty's Avatar
 
Join Date: May 2010
Location: Central Michigan
Posts: 40
Default 1930 ford 2 dr sedan rear side window

Hey folks, here is my question: I keep seeing 2drs with the back side window rolled all the way down, is this possible? Mine will only roll down about 2/3 of the window opening.
Eighty is offline   Reply With Quote
Old 03-03-2019, 07:07 PM   #2
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,508
Default Re: 1930 ford 2 dr sedan rear side window

Quote:
Originally Posted by Eighty View Post
Hey folks, here is my question: I keep seeing 2drs with the back side window rolled all the way down, is this possible? Mine will only roll down about 2/3 of the window opening.

If you see rear windows rolled all the way down in a 30/31 Tudor, ...that likely means they won't roll all the way up. The reason yours won't roll down any further is because the bottom of the glass has a stop because of the rear inner fender panels in the quarter panels is in the way.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-03-2019, 08:03 PM   #3
Eighty
Member
 
Eighty's Avatar
 
Join Date: May 2010
Location: Central Michigan
Posts: 40
Default Re: 1930 ford 2 dr sedan rear side window

Thanks for clearing that up for me, Brent in 10-uh-c
Eighty is offline   Reply With Quote
Old 03-03-2019, 10:51 PM   #4
CWPASADENA
Senior Member
 
CWPASADENA's Avatar
 
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,882
Default Re: 1930 ford 2 dr sedan rear side window

My 30 Tudor rear windows will roll all the way down and all the way up. without a problem.


My car has the stops for the down position and when the window is all the way down with the top of the glass flush with the bottom of the window opening, the window channel rests on the rubber bumper on the stop.


When I restored the car, I restored the original window regulators and they work fine.


I think when there is a Tudor when the rear side windows will not roll all the way down, the regulators are worn out and need attention.


Chris W.
CWPASADENA is offline   Reply With Quote
Old 03-04-2019, 05:24 AM   #5
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,508
Default Re: 1930 ford 2 dr sedan rear side window

Quote:
Originally Posted by CWPASADENA View Post
My 30 Tudor rear windows will roll all the way down and all the way up. without a problem.


My car has the stops for the down position and when the window is all the way down with the top of the glass flush with the bottom of the window opening, the window channel rests on the rubber bumper on the stop.


When I restored the car, I restored the original window regulators and they work fine.


I think when there is a Tudor when the rear side windows will not roll all the way down, the regulators are worn out and need attention.


Chris W.
Chris, I may have spoken too soon, and I will look at this today on a couple of cars and report back with pictures thx!
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Old 03-04-2019, 06:14 PM   #6
CWPASADENA
Senior Member
 
CWPASADENA's Avatar
 
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,882
Default Re: 1930 ford 2 dr sedan rear side window

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by BRENT in 10-uh-C View Post
Chris, I may have spoken too soon, and I will look at this today on a couple of cars and report back with pictures thx!


Just to be sure I was not thinking about one of my other cars, I checked my 30 Tudor this morning and sure enough, the rear side windows roll all the way down and all the way up.


When the windows are down, the top of the glass is even with the bottom of the window opening.


I think a lot of Model A's suffer from window regulators and felt side channels that need attention.

Chris W.

Last edited by CWPASADENA; 03-04-2019 at 06:17 PM. Reason: ELABORATION
CWPASADENA is offline   Reply With Quote
Old 03-04-2019, 06:50 PM   #7
RRW
Member
 
Join Date: Oct 2013
Location: Bullhead City, AZ
Posts: 62
Send a message via Yahoo to RRW
Default Re: 1930 ford 2 dr sedan rear side window

I have an early 30 Tudor and I am the 2nd owner with the

original owner being one of my Dad's best friends.
Original rear and front windows were replaced in 1963 with safety glass in MN and 'DO' go all the way down and all the way up.
Installed a LeBaron Bonney interior and replaced the risers in 1988.
RRW is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:00 AM.