1933/34 Cabriolet Top part

[Graham Freeman]

I am looking for the screw that fixes the No1 roof bow to the quarter hinge pillar upper arm.
Part # 40-764886.;
Anyone have a spare, know of a repro, or can supply me with dimensions?
Thanks in anticipation.

[Don Rogers]

I don't have the dimensions, but here is an image of it out of The Automotive Hardware and Trim book.

[Terry,OH]

There is a picture in the 38 hardware book p120. Looks like an easy one to make. If you have the threaded hole you have the thread and the hole it passed through you have the shoulder diameter and the approximate length. The hardware book is supposed to be actual size. IF SO, it looks like 1/2" hex head 1/8" thick. Shoulder diameter of 3/8" X 0.430" L. 1/4"-28 thread .25" L. there is an undercut where the threads meet the shoulder so the shoulder sits flush against the threaded area when the bolt is tightened down.

[FlatheadTed]

I have a sample and need to make 3 for my self ,see what I can do .I also did a small run of the Roadster casting( I think the same as Cabro ?) that the bolt screws into if any one is interested ,Ted

[Graham Freeman]

Hi Ted,

According to the parts book for 1933/34 the roadster part # is 40-714904 and is quite a bit different to the cabriolet part.
I shall give you a call.

Graham

[Elvis100]

Sponsored Links (Register now to hide all advertisements)

Bill Munoz makes the bolts for the roadster, if they are the same. See link below

https://www.fordbarn.com/forum/showthread.php?t=186785

[carguybill]

Years ago my company manufactured for me for my '34 Cabriolet the bolts you need and the tab with the snap fastener for the top. I offered them to the community as a package of all four pieces and sold quite a few. I happen to have 1 set left, If you are interested please PM me.

'34 top parts Cropped.jpg

[stangblue]

Try this Ebay Seller
eds47merkconv first open link then put name http://www.ebay.com/sch/ebayadvsearch?_sofindtype=2
He supplied mine.
I found this in Mac's I don't know if it is the same thread and shoulder you have to call?
http://www.macsautoparts.com/ford_me...passenger.html

[millersgarage]

bumping an old thread.

Anyone know where to get these bolts now?

[Als48]

That picture looks a lot like the hood hinge bolt for a 42-48 Ford/Merc. Dimensions are at least similar.

Al Hook

[millersgarage]

thread is 1/4x28