Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-02-2021, 04:59 PM   #1
eric huffman
Member
 
Join Date: Sep 2018
Location: San Diego
Posts: 45
Default key stuck in the ignition of 39 pickup

My 39 pickup has the original key BUT it is stuck in the drop down ignition switch. It will neither turn or come out. Any tips or solutions welcomed.
eric huffman is offline   Reply With Quote
Old 11-02-2021, 05:08 PM   #2
Anteek29
Senior Member
 
Anteek29's Avatar
 
Join Date: Dec 2014
Location: Santa Maria, CA
Posts: 985
Default Re: key stuck in the ignition of 39 pickup

Try spray with PB Blaster and then jiggle key.
__________________
Alan
1929 Special Coupe
1941 Pick-Up
1955 Victoria
Anteek29 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-02-2021, 06:32 PM   #3
eric huffman
Member
 
Join Date: Sep 2018
Location: San Diego
Posts: 45
Default Re: key stuck in the ignition of 39 pickup

To no avail I'm afraid. The on/off switch is installed but not connected to the bakelite switch. Don't think that would or should make a difference?
eric huffman is offline   Reply With Quote
Old 11-02-2021, 06:49 PM   #4
tomcarman
Senior Member
 
tomcarman's Avatar
 
Join Date: Feb 2017
Location: Rochester Wa
Posts: 574
Default Re: key stuck in the ignition of 39 pickup

Maybe try a little heat? Start with a hair dryer then maybe go to a propane torch, but easy does it so as not to damage anything. Does it move at all, even a little wiggle? Can you post a pic?
tomcarman is offline   Reply With Quote
Old 11-02-2021, 07:02 PM   #5
eric huffman
Member
 
Join Date: Sep 2018
Location: San Diego
Posts: 45
Default Re: key stuck in the ignition of 39 pickup

I will post pictures shortly!
eric huffman is offline   Reply With Quote
Old 11-02-2021, 07:22 PM   #6
mrtexas
Senior Member
 
mrtexas's Avatar
 
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,395
Default Re: key stuck in the ignition of 39 pickup

Sponsored Links (Register now to hide all advertisements)
Remove the steering column and then drill out the retaining screw for the lock and remove the lock mechanism. Only way to solve the problem IMHO.
__________________
41 woodie https://41fordwoodie.weebly.com/
mrtexas is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:51 AM.