|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-25-2012, 08:18 AM | #1 |
Senior Member
Join Date: Sep 2012
Location: cedar rapids iowa
Posts: 527
|
Straw wheel paint
I am researching the correct color for my wheels on my 31 roadster. Has anyone had any success with powder coating the straw wheels and if so is there a color or formula that I can give the powder coat company that is correct? I have seen several variations of colors from the tan side to a more yellow. It is difficult to repaint them if it is incorrect.
Any help would be appreciated. Todd 3131 |
09-25-2012, 08:26 AM | #2 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,511
|
Re: Straw wheel paint
Quote:
As far as repainting an incorrect colored wheel, all that is necessary is scuff the incorrect powder-painted wheel and re-coat with the color of your choosing. . |
|
Sponsored Links (Register now to hide all advertisements) |
|
09-25-2012, 08:46 AM | #3 |
Senior Member
Join Date: Sep 2012
Location: cedar rapids iowa
Posts: 527
|
Re: Straw wheel paint
I have an original paint chip book and my car is wash and riv blue with tacoma cream stripe and the original book and everything I have read over the last 40 years says straw wheels, the wheel color I have now is more tacoma cream and I do prefer it. I am just wondering where your information comes from. My big concern about the powder coating is my wheels were NOS and I don't want to screw them up. I have powder coated other wheels and have been very happy with the results but this set I want to be very careful with.
todd |
09-25-2012, 08:55 AM | #4 |
Senior Member
Join Date: May 2010
Location: Rhode Island
Posts: 1,868
|
Re: Straw wheel paint
Todd, your car came with tacoma cream painted wheels painted at the Ford factory. This information is well documented in Ford literature and has been included in the national club judging standards. If your roadster is a standard roadster prior to July 31 then it could have had straw wheels but your body color was not available on a standard roadster. Is your paint book from Ford? If so is it during the Model A production years or after?
Last edited by RonC; 09-25-2012 at 09:01 AM. |
09-25-2012, 10:03 AM | #5 | |
Senior Member
Join Date: May 2010
Location: Southbridge, Ma.
Posts: 1,614
|
Re: Straw wheel paint
Quote:
Thanks, Barry |
|
09-25-2012, 12:14 PM | #6 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,511
|
Re: Straw wheel paint
Sponsored Links (Register now to hide all advertisements)
Todd, exactly what is your fear regarding a powdercoater "screwing up" your NOS wheels? |
09-25-2012, 02:14 PM | #7 |
Senior Member
Join Date: Sep 2012
Location: cedar rapids iowa
Posts: 527
|
Re: Straw wheel paint
Just general fear, what if it chips [I know a good powder coat shouldn't] wrong color just unjustified concerns. I powder coated a set of 32 chevy wheels last summer and they looked great it should be an easy decision but when I painted the wheels 22 years ago I took of the factory henry paint. My car is a deluxe no side mount car made in early 31 around january or early february I need to install a new set of goodyear white walls these are getting worn since I put them on in 75. Oh and no guff about having a Chevy I sold it a this summer Instead of finishing it.
|
09-25-2012, 04:10 PM | #8 |
Senior Member
Join Date: Nov 2010
Location: SoCal
Posts: 236
|
Re: Straw wheel paint
Hey Brent any chance for purchasing enough powder to do 5 - 19"s?
Thanks |
09-26-2012, 09:07 AM | #9 |
Member
Join Date: Feb 2011
Location: Apex, North Carolina
Posts: 59
|
Re: Straw wheel paint
Agree with the previous "straw" color feedback. Had a set of wheels powdercoated this past summer. The shop had a Tacoma Cream color in their chart & they did the wheels only to find out that what was shown as Tacoma Cream ended up being waaaayyy off from the original Tacoma Cream. Had to order the correct Tacoma Cream from these guys:
http://www.modelawheelcolors.com/ Cost was around $125 but they shipped more than double the amount than what was needed so I have a bag with quite a bit leftover if anyone is interested. |
09-26-2012, 09:48 AM | #10 |
Senior Member
Join Date: Sep 2012
Location: cedar rapids iowa
Posts: 527
|
Re: Straw wheel paint
I would be interested in it also
|
09-26-2012, 10:07 AM | #11 |
Senior Member
Join Date: Jul 2012
Location: California
Posts: 1,696
|
Re: Straw wheel paint
Looks like Tacoma cream is $128 per bag with free shipping. Sounds like a deal!
|
09-26-2012, 11:58 AM | #12 |
Senior Member
|
Re: Straw wheel paint
I don't have version 3 but the second version of the paint guide put out by MAFCA states on page 16, "Five body styles were equipped with colored wheels as standard." "In 1930, ford made colored wheels available as an accessory on all passenger cars. At that time ony f colors were available: Tachoma Cream, Apple Green, Orange, and Aurora Red." "In 1931, Ford reduced the number of Wheel Colors to three: Apple Green, Tachoma Cream, and Aurora Red."
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
09-26-2012, 11:58 AM | #13 |
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 1,593
|
Re: Straw wheel paint
I agree with Brent as this info has been known for years that Tacoma was the wheel color from the factory. You didn't answer RonC's question for which I'm curious too. Who specifically made your color chip book that you mention? What year was the printing and does it actually state wheel colors to go with specific body colors?
|
09-26-2012, 12:07 PM | #14 |
Senior Member
Join Date: Sep 2012
Location: cedar rapids iowa
Posts: 527
|
Re: Straw wheel paint
The chip book is a ditzler book with a ford logo and I don't have a date on it, it does list the colors for each vehicle
|
09-26-2012, 12:28 PM | #15 |
Senior Member
Join Date: Jul 2012
Location: California
Posts: 1,696
|
Re: Straw wheel paint
|
09-26-2012, 01:00 PM | #16 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,511
|
Re: Straw wheel paint
Quote:
The Ditzler book Todd speaks of is probably the same book that is the predecessor to the book MAFCA publishes now. I am not sure if the Rev III now is 3 versions of when MAFCA took over Ditzlers book, --or whether the Ditzler book counts as the first one. Does anyone know? I also have some of the chips that Ditzler produced in 1959 that are pretty cool. See below... (Note the color of wheels they were suggesting for the '31 Roadster back then.) . |
|
09-26-2012, 02:34 PM | #17 |
Senior Member
Join Date: Sep 2012
Location: cedar rapids iowa
Posts: 527
|
Re: Straw wheel paint
That is the book I had a flood in iowa in 08 and that as henry built it and my original complete factory service bulletins in the original binder were all lost so is my memory as it seems
Todd |
08-14-2017, 05:37 PM | #18 |
Senior Member
Join Date: Sep 2012
Location: cedar rapids iowa
Posts: 527
|
Re: Straw wheel paint
Ok I am finally committed to powder coating my wheels is RAL 1001 still the closest match?
|
08-15-2017, 12:34 PM | #19 |
Senior Member
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,832
|
Re: Straw wheel paint
Here is the link where you can buy correct colors of powder coat.
http://www.modelawheelcolors.com/
__________________
1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|