The Ford Barn

Gary · 06-03-2011, 11:30 AM

I know it is the forum, posted on parts wanted but great deals offers never get a reply back.
Looking for complete spoon , brackets, spring, rod cover etc.for 34 ( sedan, coupe pick-up all same ? )
Anyone repro these.
Thanks for the time ford folks
gary

Henry/Kokomo · 06-03-2011, 11:36 AM

Could be wrong but thought I saw one or more advertized on the "For Sale" side of the swap section. Also, you might try e-bay. They are advertized on there periodically. Good luck.

Rowdy · 06-03-2011, 11:57 AM

This is the last one I have left. PM me if interested. Thanks Rod

https://www.fordbarn.com/forum/showthread.php?t=18564

bobH · 06-03-2011, 04:09 PM

I needed one for my 34 sedan a year ago when I was putting it together. I bought three off ebay, plus I had a fourth on-hand, and no two are the same. I wonder how many different versions Ford used? Anyway, beware... check dimensions, spoon arm-to-lever arm, location of bolt (dimension from spoon arm-to-bolt, length of spoon arm, and whatever elso you can think of. Also, I didn't come up with a good return spring, and back when I was looking, they were not available. I think repro's are available, now.
I might have enough parts to make another one, in case you are desperate.

Frank The Plumber · 06-03-2011, 06:35 PM

I thought Hot Rod Hardware on the HAMB had them. Worth a look either way, they have some cool stuff.

Gary · 06-03-2011, 08:19 PM

Sponsored Links (Register now to hide all advertisements)

Thanks everyone !

06-03-2011, 11:30 AM	#1
Gary Senior Member Join Date: May 2010 Location: Emeryville, near Oakland and the Sf Bay Bridge Posts: 133	Gas pedle spoon source I know it is the forum, posted on parts wanted but great deals offers never get a reply back. Looking for complete spoon , brackets, spring, rod cover etc.for 34 ( sedan, coupe pick-up all same ? ) Anyone repro these. Thanks for the time ford folks gary

06-03-2011, 11:36 AM	#2
Henry/Kokomo Senior Member Join Date: May 2010 Location: Kokomo, Indiana Posts: 1,731	Re: Gas pedle spoon source Could be wrong but thought I saw one or more advertized on the "For Sale" side of the swap section. Also, you might try e-bay. They are advertized on there periodically. Good luck.

06-03-2011, 11:57 AM	#3
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Gas pedle spoon source This is the last one I have left. PM me if interested. Thanks Rod https://www.fordbarn.com/forum/showthread.php?t=18564 __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

06-03-2011, 04:09 PM	#4
bobH Senior Member Join Date: May 2010 Location: so cal, placerville, vegas Posts: 1,394	Re: Gas pedle spoon source I needed one for my 34 sedan a year ago when I was putting it together. I bought three off ebay, plus I had a fourth on-hand, and no two are the same. I wonder how many different versions Ford used? Anyway, beware... check dimensions, spoon arm-to-lever arm, location of bolt (dimension from spoon arm-to-bolt, length of spoon arm, and whatever elso you can think of. Also, I didn't come up with a good return spring, and back when I was looking, they were not available. I think repro's are available, now. I might have enough parts to make another one, in case you are desperate.

06-03-2011, 06:35 PM	#5
Frank The Plumber Senior Member Join Date: May 2010 Posts: 693	Re: Gas pedle spoon source I thought Hot Rod Hardware on the HAMB had them. Worth a look either way, they have some cool stuff.

06-03-2011, 08:19 PM	#6
Gary Senior Member Join Date: May 2010 Location: Emeryville, near Oakland and the Sf Bay Bridge Posts: 133	Re: Gas pedle spoon source Sponsored Links (Register now to hide all advertisements) Thanks everyone !