The Ford Barn

WABOOM · 09-17-2018, 09:51 PM

What holds the gas peddle rod to the throttle linkage? Mine has come undone and I haven't had a chance to get all the way under there to take a good look. All I was able to do is hook it back together temporarily.

19Fordy · 09-17-2018, 10:44 PM

Here's a helpful pictorial from the book shown. Be sure and buy it.
I posted it several times so you can , print, cut and past photos together.
Hope this helps.

WABOOM · 09-17-2018, 10:55 PM

Thank you. It looks like I am missing # 9825

19Fordy · 09-17-2018, 10:58 PM

That clip shouldn't be to hard to find as it was used for many years in many cars. in fact there's one on my Snapper lawn mower.

19Fordy · 09-18-2018, 08:16 AM

Is this the clip?
https://www.summitracing.com/parts/r...yABEgLUF_D_BwE

WABOOM · 09-18-2018, 09:38 AM

Sponsored Links (Register now to hide all advertisements)

Yes. I ordered it. thank you!

scicala · 09-18-2018, 09:57 AM

Have to be careful because they come left and right hand style. The one you need is the opposite side of the one where the throttle rod hooks to the carburetor.

Sal

rotorwrench · 09-18-2018, 10:04 AM

There are different sizes too for the diameter of the rod in the application.

WABOOM · 09-18-2018, 11:59 AM

Quote:

Originally Posted by scicala

Have to be careful because they come left and right hand style. The one you need is the opposite side of the one where the throttle rod hooks to the carburetor.

Sal

Hmm. Hopefully I got the correct part!

Paul Bennett · 09-18-2018, 02:19 PM

Napa has them. When replacing my gas pedal, mine popped off the rod. When that happens, you won't find it until you buy another, which I did, both r/h and l/h, buck apiece. Yes, thereupon found the original.

If you go to Napa, take the rod as those clips come in several sizes.

09-17-2018, 09:51 PM	#1
WABOOM Senior Member Join Date: Jun 2018 Location: Minnesota Posts: 347	Gas peddle to throttle linkage 51 Merc What holds the gas peddle rod to the throttle linkage? Mine has come undone and I haven't had a chance to get all the way under there to take a good look. All I was able to do is hook it back together temporarily.

09-17-2018, 10:55 PM	#3
WABOOM Senior Member Join Date: Jun 2018 Location: Minnesota Posts: 347	Re: Gas peddle to throttle linkage 51 Merc Thank you. It looks like I am missing # 9825

09-17-2018, 10:58 PM	#4
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,939	Re: Gas peddle to throttle linkage 51 Merc That clip shouldn't be to hard to find as it was used for many years in many cars. in fact there's one on my Snapper lawn mower.

09-18-2018, 08:16 AM	#5
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,939	Re: Gas peddle to throttle linkage 51 Merc Is this the clip? https://www.summitracing.com/parts/r...yABEgLUF_D_BwE

09-18-2018, 09:38 AM	#6
WABOOM Senior Member Join Date: Jun 2018 Location: Minnesota Posts: 347	Re: Gas peddle to throttle linkage 51 Merc Sponsored Links (Register now to hide all advertisements) Yes. I ordered it. thank you!

09-18-2018, 09:57 AM	#7
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,705	Re: Gas peddle to throttle linkage 51 Merc Have to be careful because they come left and right hand style. The one you need is the opposite side of the one where the throttle rod hooks to the carburetor. Sal

09-18-2018, 10:04 AM	#8
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,427	Re: Gas peddle to throttle linkage 51 Merc There are different sizes too for the diameter of the rod in the application.

09-18-2018, 02:19 PM	#10
Paul Bennett Senior Member Join Date: Sep 2016 Posts: 628	Re: Gas peddle to throttle linkage 51 Merc Napa has them. When replacing my gas pedal, mine popped off the rod. When that happens, you won't find it until you buy another, which I did, both r/h and l/h, buck apiece. Yes, thereupon found the original. If you go to Napa, take the rod as those clips come in several sizes.