|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-11-2015, 02:32 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 239
|
32 Windshield frame disassemble
Having trouble getting screws out to disasemble windshield frame on 32 5-window. Have soaked off and on for months with kroil and blaster. Have tapped, hammered and even used a small hand held impact to no avail
Any other suggestions |
03-11-2015, 02:45 PM | #2 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,946
|
Re: 32 Windshield frame disassemble
Sometimes I find that if you try tightening them to get It to move they will break loose. Then loosen it, worth a try if you haven't already
|
Sponsored Links (Register now to hide all advertisements) |
|
03-11-2015, 02:48 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 4,470
|
Re: 32 Windshield frame disassemble
As a last resort, drill and re tap.
|
03-11-2015, 09:46 PM | #4 |
Junior Member
Join Date: May 2010
Location: MA
Posts: 27
|
Re: 32 Windshield frame disassemble
You might try soaking the frame in a molasses bath. (1 part molasses and 8 parts water). This solution is used to remove rust and I have used it very successfully. Usually, all bolts are easily removed after soaking for 2 weeks. Frame will be rust free also! Pressure wash to remove the molasses residue, and use some After Blast from Eastwood to keep the cleaned metal from flash rusting. GOOD LUCK!
|
03-15-2015, 08:38 AM | #5 |
Junior Member
Join Date: Mar 2011
Location: Vincent Alabama
Posts: 7
|
Re: 32 Windshield frame disassemble
Heat the screw with a small torch to expand it, once cool it should come loose.
|
03-15-2015, 11:46 PM | #6 |
Senior Member
Join Date: Jun 2010
Location: Norcal
Posts: 125
|
Re: 32 Windshield frame disassemble
Sponsored Links (Register now to hide all advertisements)
|
03-16-2015, 12:05 PM | #7 |
Senior Member
Join Date: May 2010
Location: Northwest CT
Posts: 503
|
Re: 32 Windshield frame disassemble
I second the molasses! I have been able to free up many parts with this method.
Make sure you use feed grade, I bought a jug of molasses that is used to lure deer. Keep V-8ing and 4-banging!
__________________
She just don't have the appetite For gas somehow, And Dad, I got four carburetors Hooked up on it now. I tried to hook another To see if I'd do a little good, But ain't no place to put it 'Less I perforate the hood. Wanted, lower side sections of 32 radiator cowl. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|