The Ford Barn

LEM · 10-03-2019, 12:45 AM

I have dismantled a very rusted early 28 transmission tower and there are two parts in the assembly that will need to be replaced. These two parts; a fiber doughnut and doughnut retainer are not available in the vender catalogs that I have. I find it very strange that these two parts are not mentioned in the repair manuals either. Are they not needed?

Tom Endy · 10-03-2019, 01:09 AM

Sponsored Links (Register now to hide all advertisements)

The early transmissions had these two parts along with a shorter spring. I believe if you replace the spring with the longer one in place of the two parts it will work.

Tom Endy

10-03-2019, 01:09 AM	#2
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,131	Re: Transmission tower assembly Sponsored Links (Register now to hide all advertisements) The early transmissions had these two parts along with a shorter spring. I believe if you replace the spring with the longer one in place of the two parts it will work. Tom Endy