|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-08-2017, 02:28 PM | #1 |
Senior Member
Join Date: Sep 2014
Location: Maine
Posts: 325
|
35 Pickup Brakes dragging
Working the re-build bugs out of the 35 pickup. Having trouble adjusting brakes (Hyd conversion). I adjust the brakes so that the wheels spin freely. Drive 2-3 miles and the brake lights start flickering on/off and the front wheel brakes start dragging and getting hot, real hot. Rear wheels appear to be ok. The brake pedal is right at the top and hard when this happens. Normally I have couple of inches of play.
I've adjusted the brakes twice with the same results. Any thoughts are appreciated....... Thanks
__________________
Lineman, the only dumb animal that can harness himself !! |
06-08-2017, 02:31 PM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 35 Pickup Brakes dragging
Something is keeping the master cylinder from returning to it's relaxed position. It is maintaining pressure in the lines. Are you using a two outlet master cylinder? Is the brake pedal spring totally retracting the pedal?
Last edited by JSeery; 06-08-2017 at 02:37 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
06-08-2017, 03:33 PM | #3 |
Senior Member
Join Date: Sep 2014
Location: Maine
Posts: 325
|
Re: 35 Pickup Brakes dragging
Sponsored Links (Register now to hide all advertisements)
__________________
Lineman, the only dumb animal that can harness himself !! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|