Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-29-2014, 10:12 PM   #1
29tudorsedan
Member
 
29tudorsedan's Avatar
 
Join Date: Nov 2012
Location: D/FW, TX
Posts: 74
Default Goodyear balloon marking questions

After looking at all of the fantastic pictures posted by others at French Lick, I'm noticing almost everyone's tires have some markings on them which are colored. I have right now 2 Goodyears and three firestones, soon to be 4 Goodyears. The Goodyears are the ones marked Goodyear balloon, from brattons, does that narrow it down to the ones I'm speaking of?

My question is with those Goodyears is there anything that should/could be painted?

Thanks!
29tudorsedan is offline   Reply With Quote
Old 06-30-2014, 01:55 AM   #2
Arlen
Senior Member
 
Arlen's Avatar
 
Join Date: May 2010
Location: Dallas
Posts: 524
Default Re: Goodyear balloon marking questions

The flag on the goodyears is painted. The pole is silver. The flag is blue and yellow. Top and bottom is yellow, left and right side is blue.
__________________
DMAFC
Arlen is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-30-2014, 07:30 AM   #3
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Goodyear balloon marking questions

Here is one Jim Brand painted at the Oshkosh Model A meet.
Attached Images
File Type: jpg Jim Brand Striping1.jpg (67.8 KB, 92 views)
Tom Wesenberg is offline   Reply With Quote
Old 06-30-2014, 08:26 AM   #4
Marco Tahtaras
Senior Member
 
Marco Tahtaras's Avatar
 
Join Date: May 2010
Posts: 3,099
Default Re: Goodyear balloon marking questions

The flags were painted on both sides of the tire. The old Standards called for the silver stripe beginning sometime in 1931 but that was in error. That applied to 'off the shelf' Goodyear tires but not those provided by Ford.

__________________
http://www.abarnyard.com/
Marco Tahtaras is offline   Reply With Quote
Old 06-30-2014, 10:14 AM   #5
Gary Karr
Senior Member
 
Gary Karr's Avatar
 
Join Date: Jun 2010
Location: San Diego, CA
Posts: 1,486
Default Re: Goodyear balloon marking questions

For the 21" Goodyears, the logo is painted white in the center and red around it on both sides. This is the recessed areas of these, not the lettering. Also, 21" tires have the red centering line completely around them, also on both sides. Good luck! It's a lot of detail work.
Gary Karr is offline   Reply With Quote
Old 06-30-2014, 10:43 AM   #6
d.j. moordigian
Senior Member
 
d.j. moordigian's Avatar
 
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
Default Re: Goodyear balloon marking questions

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Gary Karr View Post
For the 21" Goodyears, the logo is painted white in the center and red around it on both sides. This is the recessed areas of these, not the lettering. Also, 21" tires have the red centering line completely around them, also on both sides. Good luck! It's a lot of detail work.
Okay Gary,.....I think I need a photo for your explanation, please.
d.j. moordigian is offline   Reply With Quote
Old 06-30-2014, 02:51 PM   #7
29tudorsedan
Member
 
29tudorsedan's Avatar
 
Join Date: Nov 2012
Location: D/FW, TX
Posts: 74
Default Re: Goodyear balloon marking questions

Quote:
Originally Posted by Gary Karr View Post
For the 21" Goodyears, the logo is painted white in the center and red around it on both sides. This is the recessed areas of these, not the lettering. Also, 21" tires have the red centering line completely around them, also on both sides. Good luck! It's a lot of detail work.
Ok perfect, I agree a picture would be nice if anyone has one but I understand what you're saying.

I should've specified these are the 21" tires, as Gary is describing, they do not have a flag, yet have very large lettering on the tire. I'll post a picture of my unpainted ones after work, and if someone has a photo of a painted 21" Goodyear that'd be great!
29tudorsedan is offline   Reply With Quote
Old 06-30-2014, 04:04 PM   #8
d.j. moordigian
Senior Member
 
d.j. moordigian's Avatar
 
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
Default Re: Goodyear balloon marking questions

Quote:
Originally Posted by WardAZ View Post
Review this thread and see an 21" Goodyear original logo.

https://www.fordbarn.com/forum/showth...ight=tire+logo
Thanks Ward.......forgot about that logo on the Goodyear's!
d.j. moordigian is offline   Reply With Quote
Old 06-30-2014, 05:03 PM   #9
29tudorsedan
Member
 
29tudorsedan's Avatar
 
Join Date: Nov 2012
Location: D/FW, TX
Posts: 74
Default Re: Goodyear balloon marking questions

Also, I didn't take a picture of my tire, but this is the design we're speaking of on the 21" Goodyears to clarify for anyone.



Thanks for that link, helped to see it painted also, looking forward to adding that small detail.
29tudorsedan is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:58 AM.