|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-22-2018, 05:20 AM | #21 |
Senior Member
Join Date: May 2010
Posts: 1,304
|
Re: This is the hobby in Russia
AA trucks were built in England into 1936, factory fitted with the B engine with the fully counterweighted crank .Parts are still fairly easy to find here . My heart goes out to that Russian restorer especially his fender and battling with that dire welded up B waterpump ,I must have about a dozen or more in my "stores" . i would happily mail him one free for nuddinks If I could get his address in English and Cyrillic depending on mailing cost !!! PM me if I can help him.
John in sunny Suffolk County England . |
08-22-2018, 03:07 PM | #22 |
Senior Member
Join Date: May 2010
Location: Ogden Utah
Posts: 242
|
Re: This is the hobby in Russia
I restored a 31 Cabriolet that came back to the U S from Finland that I believe spent some time in Russia because it had a Gaz engine. Someone had used a six inch knife switch for lack of ignition switch. You do what you have to do especially after WW11.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-23-2018, 02:32 PM | #23 | |
Senior Member
Join Date: Jul 2012
Location: Australia/USA/EU/Soviet Russia
Posts: 1,105
|
Re: This is the hobby in Russia
Quote:
Kind offer John. I've sent him a message asking if he needs any parts...I will let you know. He tried to register on Fordbarn but wasn't allowed. I think this website has geo-blocking that stops people in some countries from registering.
__________________
|
|
08-23-2018, 03:33 PM | #24 |
Senior Member
Join Date: Jul 2012
Location: Australia/USA/EU/Soviet Russia
Posts: 1,105
|
Re: This is the hobby in Russia
The project started as this in 2012. The engine was fitted with a magneto from a Antonov bi-plane
__________________
Last edited by M2M; 08-23-2018 at 03:43 PM. |
08-23-2018, 09:31 PM | #25 |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: This is the hobby in Russia
I know that Plane! The Antonov AN2 Colt. It has an enormous 1000 HP , 9 Cylinder radial engine. How in hell do you adapt a 9 cyl. magneto to a four cyl, engine? I've got to see that to see how it was done.
Terry |
08-25-2018, 01:09 PM | #26 |
Senior Member
Join Date: May 2010
Posts: 1,304
|
Re: This is the hobby in Russia
Sponsored Links (Register now to hide all advertisements)
John in same place same weather . |
08-26-2018, 06:44 PM | #27 |
Senior Member
Join Date: Jan 2018
Location: Tocumwal, NSW, Australia
Posts: 1,748
|
Re: This is the hobby in Russia
Revisitan old story of mine. This is a response to a quote from M2M below which he said in his story “This is the hobby in Russia”story #1 and that too is a well worth read.
“When you've got no money and A parts are not falling out of the sky like in the USA, you do what you've gotta do.” Butbovine do fall from the sky. Read my story number 84 in "tell a Model A related story"
__________________
I know many things, But I don't know everything, Sometimes I forget things. And there are times when I have a long memory. |
08-27-2018, 04:29 AM | #28 |
Senior Member
Join Date: Jul 2012
Location: Australia/USA/EU/Soviet Russia
Posts: 1,105
|
Re: This is the hobby in Russia
By the way, the writing on the wall says NO SMOKING! which is not a bad idea when you have leaky old Soviet acetylene gas cylinders laying around.
__________________
|
08-27-2018, 07:40 AM | #29 |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: This is the hobby in Russia
I thought that's what it said! I was going to ask but got into other things. Leaky old cylinders are not something only Russians have to worry about. Our cylinders have to be hydrostatically tested once every 10 years and stamped. The oldest one I ever saw was a 1918 date.
Terry |
09-11-2018, 08:31 PM | #30 |
Senior Member
Join Date: Jul 2012
Location: Australia/USA/EU/Soviet Russia
Posts: 1,105
|
Re: This is the hobby in Russia
__________________
|
09-12-2018, 04:35 AM | #31 |
Senior Member
Join Date: Jan 2018
Location: Tocumwal, NSW, Australia
Posts: 1,748
|
Re: This is the hobby in Russia
These Russians seem to have much rebuilding skill. So much so I'm starting to wonder if these shots were not infact Russian but were shot in the workshops in Hollywood?
__________________
I know many things, But I don't know everything, Sometimes I forget things. And there are times when I have a long memory. |
09-12-2018, 09:42 AM | #32 |
Senior Member
Join Date: Jun 2010
Location: North Chesterfield, VA
Posts: 299
|
Re: This is the hobby in Russia
Love the jack stand, but I don't think I would get under it.
__________________
'31 40B '31 68C |
09-12-2018, 12:14 PM | #33 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
|
Re: This is the hobby in Russia
That Mobiloil fender came out pretty decent, I'd say.
|
09-22-2018, 06:31 PM | #34 |
Senior Member
Join Date: Jul 2012
Location: Australia/USA/EU/Soviet Russia
Posts: 1,105
|
Re: This is the hobby in Russia
Some more info about this project. This AA is actually on the island of Sakhalin, north of Japan. The young owner Andrey has moved to Khabarovsk (a city in the Russian Far East mainland), where he hopes next year to buy land and build a house (and workshop) for him, his wife and young daughter. Until then the AA remains at his father's place. Andrey works on the AA when he visits his father in summer. Andrey is missing the following parts: The light switch on the steering wheel, door handles, one headlight, a horn button, a tail lamp, a generator, a radiator cap and a gas cylinder, an ignition switch, Zenith carburetor, an ignition distributor. If anyone would be willing to donate any of these parts I can put you in contact with him; send me a PM for his email address. For people in the USA able to donate parts I can help getting small parts to him as I fly to Russia from the USA fairly regularly.
__________________
|
09-23-2018, 12:00 AM | #35 |
Senior Member
Join Date: Jan 2018
Location: Tocumwal, NSW, Australia
Posts: 1,748
|
Re: This is the hobby in Russia
I admire both his skill and tenacity. Tell him that please.
__________________
I know many things, But I don't know everything, Sometimes I forget things. And there are times when I have a long memory. |
09-24-2018, 01:15 AM | #36 |
Senior Member
Join Date: Apr 2011
Location: South pacific island
Posts: 1,724
|
Re: This is the hobby in Russia
Those fenders turned out good.
If it helps him at all i made my own horn button from a generic button, a length of rod with flats filed in it for the light switch at the bottom, some wire, and painted fibreglass surround for the button at the top.
__________________
<Link> This is how we roll<Link> "I'm Convinced that no one really reads posts anymore; they just fabricate what they think the post says then ramble on about red herrings."--Bob Outcasts rules of old cars #1 Fun is imperative, mainstream is overrated #2 If they think it is impossible, prove them wrong #3 If the science says it impossible you are not being creative enough. #4 No shame in recreating something you never had #5 If it were not for the law & physics you would be unstoppable |
09-24-2018, 07:35 AM | #37 |
Senior Member
Join Date: Jan 2018
Location: Greenwich, CT
Posts: 140
|
Re: This is the hobby in Russia
Looks like he could also use a Ziploc full of cotter pins. Check out the nail holding the choke rod on. Wish Henry could have seen it. The truck, for sure, the nail not so much...
|
09-24-2018, 07:49 AM | #38 |
Senior Member
Join Date: Jan 2018
Location: Greenwich, CT
Posts: 140
|
Re: This is the hobby in Russia
Looks like he could also use a Ziploc full of cotter pins. Check out the nail holding the choke rod on. Wish Henry could have seen it. The truck, for sure, the nail not so much...
|
09-24-2018, 07:50 AM | #39 |
Senior Member
Join Date: Jan 2018
Location: Greenwich, CT
Posts: 140
|
Re: This is the hobby in Russia
Sorry for the resend.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|