|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-17-2010, 12:15 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 832
|
PARTING:1936 Ford Pickup Sheetmetal
City:
Los Molinos
State:
California
Price:
$100
PARTED '35 -'37 pickup trucks: .......1 Nice 1936 right side door with guts 300.00....One rusted out inside bottom 1936 gutted right door $125.00, one with no guts also rusted inside bottom and welded on replacement top $100.00,.... Pair 1936 hood sides with very rough tops, need work $50.00...... 1937 hood sides that need work $40.00....1936-1937 left front fender rough $50.00..... ask for other parts that I may have on hand for 1935-1937 Ford pickups,PM me or email me at [email protected] call 530-384-1651.....
Last edited by Aircooled1; 08-05-2016 at 03:16 PM. Reason: sold parts |
09-21-2010, 05:58 AM | #2 |
Senior Member
Join Date: May 2010
Location: Edgefield, SC
Posts: 811
|
Re: PARTING:1936 Ford Pickup Sheetmetal
The spare tire rod shown in the picture fits 39 and maybe 38. The 36/7 only had one "eye" in the middle.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-07-2010, 06:57 PM | #3 |
Member
Join Date: May 2010
Location: R I
Posts: 44
|
Re: PARTING:1936 Ford Pickup Sheetmetal
do you possibly have an inner grill for a 35 ford pick up?email me at [email protected] Thanks
|
12-12-2010, 07:11 AM | #4 |
Junior Member
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Hi I need a 35 Ford pk up inner lower grill panel, it has two crank holes pressed into the panel.......Cheer`s Bri
|
12-12-2010, 11:58 PM | #5 |
Member
Join Date: Sep 2010
Location: San Diego
Posts: 92
|
Re: PARTING:1936 Ford Pickup Sheetmetal
I'm looking for the two plates that cover the windshield hinges for a 35 pickup Thanks Dave
|
12-23-2010, 04:57 PM | #6 |
Senior Member
Join Date: May 2010
Location: Sf bay area
Posts: 1,464
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Sponsored Links (Register now to hide all advertisements)
|
12-23-2010, 11:23 PM | #7 |
Senior Member
Join Date: Nov 2010
Location: Magnolia Texas
Posts: 586
|
Re: PARTING:1936 Ford Pickup Sheetmetal
I need those little bed side panels that are in front of the rear fenders, and between the running boards and the bed, they close off that space.
|
05-12-2011, 05:35 PM | #8 |
Junior Member
Join Date: May 2011
Posts: 1
|
Re: PARTING:1936 Ford Pickup Sheetmetal
I need the L/H windshield garnish strip for my 1936 ford pick-up.
|
08-22-2011, 03:23 PM | #9 |
Junior Member
Join Date: Aug 2011
Location: Veazie, Maine
Posts: 29
|
Re: PARTING:1936 Ford Pickup Sheetmetal
i am trying to find the sheet metal under the rear seat area- the last 8" that fits against the rear of the cab on my 1936 ford pickup
|
10-26-2011, 11:46 AM | #10 |
Member
Join Date: Aug 2010
Location: Elkhart,IN
Posts: 37
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Hi,
Do you have any 35 or 36 3 window doors? Thanks, Rex |
10-30-2011, 09:24 AM | #11 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: PARTING:1936 Ford Pickup Sheetmetal
I have no sheet metal for coupes & sedans,only for trucks and pickups... Bump...
|
12-25-2011, 05:05 AM | #12 |
Junior Member
Join Date: Nov 2011
Location: London, Kentucky
Posts: 15
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Do you still have the 36 pickup windshield frame. I will be needing more parts as I get further along - thanks
|
12-27-2011, 10:18 PM | #13 |
Junior Member
|
Re: PARTING:1936 Ford Pickup Sheetmetal
looking for glove box cover and windshield motor covers left and right for 1937 ford truck
|
01-04-2012, 09:28 PM | #14 |
Junior Member
Join Date: Nov 2011
Location: London, Kentucky
Posts: 15
|
Re: PARTING:1936 Ford Pickup Sheetmetal
I am new to the forum and starting to work on my 36 Ford panel. I am looking for a windshield frame and a couple of horns that mount beside the grill. Any help will be greatly appreciated. shoot me a price if you can help out or maybe steer me in the right direction to find these much needed parts. Thanks
|
01-05-2012, 06:01 AM | #15 |
Senior Member
Join Date: May 2010
Location: Sydney, Australia
Posts: 949
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Can you post photos of the '36' rear guards?
Thanks |
02-05-2012, 10:36 AM | #16 |
Junior Member
Join Date: Feb 2012
Location: Watford City ND
Posts: 5
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Bump ?
|
06-20-2012, 12:20 PM | #17 |
Junior Member
Join Date: May 2010
Location: Long Beach, MS
Posts: 10
|
Re: PARTING:1936 Ford Pickup Sheetmetal
I am looking for the front bottom 8" of the rear fenders that bolt to the running boards for a 36 pickup. Do you have any that are bad in the rear and top//
thanks DD |
07-07-2012, 06:24 AM | #18 |
Senior Member
Join Date: Dec 2011
Location: Houston Texas
Posts: 170
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Have picture of 36 grille
thanks |
08-14-2012, 10:50 AM | #19 |
Junior Member
Join Date: Jul 2012
Posts: 2
|
Re: PARTING:1936 Ford Pickup Sheetmetal
do you still have cab for sale
|
09-02-2012, 08:57 AM | #20 |
Member
Join Date: Nov 2011
Posts: 37
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Hi, I am looking for a driver side fender and headlight bracket for a 35-36 truck.
Thanks |
10-23-2012, 09:30 AM | #21 |
Member
Join Date: Nov 2011
Posts: 37
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Do you have a headlight mount post for the driver side?
|
10-30-2012, 11:06 PM | #22 |
Junior Member
Join Date: Jul 2010
Posts: 26
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Hey,
I am looking for the hood latch and bumper bolt on tabs for the hood. My application is for a coupe but I used to have a pickup and the looked the same. Small pieces I know but I need them. Thanks, Conrad |
Sponsored Links (Register now to hide all advertisements) |
|
02-18-2013, 11:32 PM | #23 |
Junior Member
Join Date: Feb 2013
Posts: 2
|
Re: PARTING:1936 Ford Pickup Sheetmetal
I am looking for the spare tire strap that wraps around the top of the spare and goes down behind the spare. I have the locking hubcap and need the other half of the strap. email me
[email protected] |
03-08-2013, 05:39 AM | #24 |
Senior Member
Join Date: May 2011
Location: Leland, NC
Posts: 135
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Do you have a seat riser for a 1937 Ford PU? Jack
|
05-25-2013, 08:54 AM | #25 |
Junior Member
Join Date: May 2010
Location: Long Beach, MS
Posts: 10
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Need front of rear fenders about 6" 1936 pickup can you help
DD |
08-13-2013, 11:29 PM | #26 |
Senior Member
Join Date: Jun 2013
Location: home of the REDS
Posts: 392
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Sponsored Links (Register now to hide all advertisements)
|
10-26-2013, 10:27 PM | #27 |
Junior Member
Join Date: Aug 2013
Location: Houston
Posts: 10
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Can you send me Pictures of the drivers side rear Fender? [email protected]
|
12-26-2013, 12:46 PM | #28 |
Senior Member
Join Date: Nov 2012
Location: Elgin Illinois
Posts: 736
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Would you sell me the Truck Grille for $200. including postage to Elgin, Illinois? Thanks, Rog
|
01-24-2017, 02:23 PM | #29 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Still have 'em ..... Bump...
|
07-05-2017, 12:08 PM | #30 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Have only a few Old Ford truck parts left for sale..... Bump...
|
09-03-2017, 01:54 PM | #31 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Running low on the old F
|
10-15-2017, 10:53 AM | #32 |
Senior Member
Join Date: May 2010
Posts: 832
|
Re: PARTING:1936 Ford Pickup Sheetmetal
Have only a few Old Ford truck parts left for sale..... Bump...
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|