Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-21-2019, 02:49 PM   #1
artron9
Senior Member
 
Join Date: Nov 2016
Location: Lexington MA
Posts: 130
Default Flathead heater continued

On an earlier thread I indicated that I was having a problem with my 52 v8 heater. Recently, I flushed the heater core and bypassed the control valve which , I believe, is faulty. The core looks very clean with no sludge when flushed. However, I'm still not getting any heat when the engine is at normal operating temp. The hose from the block to the core is quite warm. The return hose from the core is cool. The system is circulating from the core to the lower right exit at the block. The temp at the radiator fill appears quite hot.Can't seem to figure this out !
artron9 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:15 PM.