|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-02-2019, 08:03 PM | #1 |
Senior Member
Join Date: Sep 2010
Location: michigan
Posts: 1,126
|
1929 open car wind wings
I have a 29 phaeton with reproduction wind wings . I have a left side original set that need to be replated and I am in search of a set for,the passenger side. Does anyone one know if I could get a correct looking bolt and get rid of the a corn bolts while I am in search and going to get the original ones plated when I get all of the proper parts any and all information is appreciated thanks so much Joe.
|
05-03-2019, 07:43 AM | #2 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,508
|
Re: 1929 open car wind wings
Fabricate it on a lathe.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-03-2019, 09:32 AM | #3 |
Senior Member
Join Date: Sep 2010
Location: michigan
Posts: 1,126
|
Re: 1929 open car wind wings
Brent,thanks for responding to my question,please bear with me are you suggesting that I have a bolt lathe and would your shop make them? What I believe I have is a thread stud that goes into the bracket and the acorn nut on the outside to hold in place ? I am hoping to one day have a complete restored set to put on my car one day I thought I saw someone had got a proper looking bolt and replaced the stud with the bolt . What I am wondering is this poo what size and thread and where I might purchase them if a lathe is the only way I am very interested thank you so much for the y Joe
|
05-04-2019, 09:53 PM | #4 |
Senior Member
Join Date: Sep 2010
Location: michigan
Posts: 1,126
|
Re: 1929 open car wind wings
Still looking for help ! Please help if you can
|
05-05-2019, 11:15 AM | #5 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,743
|
Re: 1929 open car wind wings
Is this the bolt on Val and Mark Maron's Roadster you are asking about?
Bob |
05-05-2019, 11:30 AM | #6 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,508
|
Re: 1929 open car wind wings
Sponsored Links (Register now to hide all advertisements)
Quote:
Here is a copy of the original print. Here are the dimensions. Supposed to be Nickel plated. . . |
|
05-05-2019, 07:46 PM | #7 |
Senior Member
Join Date: Sep 2010
Location: michigan
Posts: 1,126
|
Re: 1929 open car wind wings
Thanks so much guys I can work with this information! I am so grateful to both of you Brent and Bob .
|
05-06-2019, 07:43 AM | #8 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,508
|
Re: 1929 open car wind wings
Quote:
The info came from your State. Go visit the library sometime and you will likely be hooked. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|