Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-28-2015, 12:00 AM   #1
SJ13
Junior Member
 
SJ13's Avatar
 
Join Date: Dec 2014
Location: Oly Wa.
Posts: 28
Default windshield wiper cables & spool

cable jumped the spool on my 60 Merc windshield wipers is there a trick to re-spooling these cables ? special tool to reset spring while re-wrapping or do I have to dis-assemble the heater box under the dash ... hard to explain w/out picture but underneath the dash there are four cables wrapped around a spool w tiny knobs that hold them secure... 2 are long 2 are shorter as the wipers go down and up the spool turns to make the wipers work back and forth ... anyone ever dealt with this situation before

Last edited by SJ13; 01-28-2015 at 02:34 PM.
SJ13 is offline   Reply With Quote
Old 02-12-2015, 07:25 PM   #2
SJ13
Junior Member
 
SJ13's Avatar
 
Join Date: Dec 2014
Location: Oly Wa.
Posts: 28
Default Re: windshield wiper cables & spool

Sponsored Links (Register now to hide all advertisements)
update on this I found and purchased a 1960 Mercury Monterey shop manual that has every spec. and all information needed
SJ13 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:50 AM.