Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-09-2020, 06:14 AM   #1
billybronco1
Senior Member
 
Join Date: Dec 2012
Location: MA
Posts: 570
Default 36 Can't Stop The Oil Pan Drain Plug Drip

What gasket do you find is best on the oil pan drain plug? I have replaced the drain plug and can not stop the constant drip. I see Mac's has two types of washers, the crush type and the standard flat copper ones.
billybronco1 is offline   Reply With Quote
Old 10-09-2020, 06:53 AM   #2
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Don't be afraid to use some non-hardening Permatex along with whatever washer you choose to use.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
51 MERC-CT is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-09-2020, 07:31 AM   #3
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

On some modern cars washers with rubber insert are used, I have used those washers on other problem leak cars
Kurt in NJ is offline   Reply With Quote
Old 10-09-2020, 08:17 AM   #4
Jacques1960
Senior Member
 
Jacques1960's Avatar
 
Join Date: Sep 2020
Location: Mount Desert, Maine
Posts: 504
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

At your next oil change, take a moment to determine whether the threads of the drain are damaged or whether the surface to which the washer seals is not smooth; either is easily corrected and should assist with a permanent fix. In the interim, +1 on the Permatex option.
__________________
No job’s done ‘til it’s all done
Jacques1960 is offline   Reply With Quote
Old 10-09-2020, 08:22 AM   #5
Ron Pilger
Senior Member
 
Ron Pilger's Avatar
 
Join Date: May 2010
Location: Camrose, Alberta
Posts: 396
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Suspected partial cross-threading at some point in the car's long run of life
Ron Pilger is offline   Reply With Quote
Old 10-09-2020, 09:44 AM   #6
RalphG
Senior Member
 
RalphG's Avatar
 
Join Date: Sep 2014
Location: Sask. Canada
Posts: 2,419
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Sponsored Links (Register now to hide all advertisements)
Teflon tape is a popular hydraulic thread sealant here and I've used it on oil pan plugs before.
RalphG is offline   Reply With Quote
Old 10-09-2020, 12:08 PM   #7
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,856
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Quote:
Originally Posted by RalphG View Post
Teflon tape is a popular hydraulic thread sealant here and I've used it on oil pan plugs before.
I'm not too sure I would want to use Teflon tape on oil fittings, plugs, etc It's not inconceivable that pieces of that tape might get inside the oil pan, and get pulled into the oil flow system, causing some blockage in small passageways. I know it's a no no on gasoline/fuel supply lines.

Quote:
Originally Posted by billybronco1 View Post
What gasket do you find is best on the oil pan drain plug? I have replaced the drain plug and can not stop the constant drip. I see Mac's has two types of washers, the crush type and the standard flat copper ones.
I would do as suggest by someone else here, check for cross threading of plug & oil pan threads, look for other possible damage of plug and pan in the sealing areas, and find or make a copper gasket that will stay on the plug when it's removed from pan
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
JM 35 Sedan is offline   Reply With Quote
Old 10-09-2020, 12:43 PM   #8
swedishsteel
Senior Member
 
Join Date: Jan 2011
Posts: 341
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

My 36 marks it's territory under the drain plug as well. In my case it isn't the plug--the bung itself leaks from the seam where it is attached to the oil pan. It is on my project list to take the pan off some day and put some JB Weld on the inside, but it will be done tomorrow..........and we know tomorrow is never here!!
swedishsteel is offline   Reply With Quote
Old 10-09-2020, 02:40 PM   #9
Jeff/Illinois
Senior Member
 
Jeff/Illinois's Avatar
 
Join Date: May 2010
Posts: 2,787
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Quote:
Originally Posted by swedishsteel View Post
My 36 marks it's territory under the drain plug as well. In my case it isn't the plug--the bung itself leaks from the seam where it is attached to the oil pan. It is on my project list to take the pan off some day and put some JB Weld on the inside, but it will be done tomorrow..........and we know tomorrow is never here!!
I think after taking off that pan, if it was me, I'd get it brazed.

I'm not a big fan of JB Weld never had very good luck with that stuff.
Jeff/Illinois is offline   Reply With Quote
Old 10-09-2020, 04:14 PM   #10
billybronco1
Senior Member
 
Join Date: Dec 2012
Location: MA
Posts: 570
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Thanks guys, I will take a closer look next time and will use some Permatex. So no comments on what washer to use? Anything one is as good as the other?
billybronco1 is offline   Reply With Quote
Old 10-09-2020, 06:53 PM   #11
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,965
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Have you tried a plastic washer backed up with a steel one?
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Old 10-09-2020, 07:05 PM   #12
billybronco1
Senior Member
 
Join Date: Dec 2012
Location: MA
Posts: 570
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Have not tried a plastic washer.
billybronco1 is offline   Reply With Quote
Old 10-09-2020, 07:06 PM   #13
whizzernick
Senior Member
 
whizzernick's Avatar
 
Join Date: Jul 2013
Location: Hayward Ca
Posts: 635
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

have you thought the leak might come from the large cotter pin in rear of pan ?
whizzernick is offline   Reply With Quote
Old 10-09-2020, 07:13 PM   #14
oldford2
Senior Member
 
oldford2's Avatar
 
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

I use a large rubber O ring. Works great
oldford2 is offline   Reply With Quote
Old 10-09-2020, 07:13 PM   #15
billybronco1
Senior Member
 
Join Date: Dec 2012
Location: MA
Posts: 570
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

I have read about the cotter pin, have not investigated yet, need to really study under there next time my body feels like crawling under.
billybronco1 is offline   Reply With Quote
Old 10-09-2020, 07:17 PM   #16
billybronco1
Senior Member
 
Join Date: Dec 2012
Location: MA
Posts: 570
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Quote:
Originally Posted by oldford2 View Post
I use a large rubber O ring. Works great
Interesting idea, I suppose you need to be real careful not to over tighten the plug. Do use any other washer with the o-ring or just the o-ring? I have plenty of those.
billybronco1 is offline   Reply With Quote
Old 10-09-2020, 08:39 PM   #17
Zeke3
Senior Member
 
Zeke3's Avatar
 
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,401
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

I am not a fan of using an O ring in a joint that is not designed for it. I would use a copper or aluminum washer and replace it every oil change.
Zeke3 is offline   Reply With Quote
Old 10-10-2020, 12:46 AM   #18
aussie merc
Senior Member
 
aussie merc's Avatar
 
Join Date: Sep 2016
Location: sydney australia
Posts: 1,025
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

pipe tape was suggested by someone i to don't like tape for same reasons however i do use the liquid Teflon paste Wipe some on the thread small bead on the washer tighten and wipe off excess works a treat
aussie merc is offline   Reply With Quote
Old 10-10-2020, 05:55 AM   #19
fortyfords
Senior Member
 
fortyfords's Avatar
 
Join Date: Mar 2011
Location: faucett, mo
Posts: 419
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

Have your machinist buddy turn out a thin aluminum washer for you or use my favorite thread sealer: Blue Monster, great stuff on anything but wash the area with alcohol first.
fortyfords is offline   Reply With Quote
Old 10-10-2020, 08:27 AM   #20
Norris McCarty
Member
 
Norris McCarty's Avatar
 
Join Date: Sep 2020
Location: San Angelo Texas
Posts: 56
Default Re: 36 Can't Stop The Oil Pan Drain Plug Drip

A little Loctite 518 on between the washer and the pan will stop the leak and it’ll still be easy to remove.
Norris McCarty is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:13 AM.