The Ford Barn

SUHRsc · 12-02-2013, 08:04 PM

I started making this panel for my 26-27 roadster racecar but then decided to make the entire side of the car from one piece, eliminating the door, etc.

This is not perfect as I just stopped working on it when I changed my mind about the project.. has a couple dings and whatnot that will need attention

You will need to add your own bracing and then finish out a few areas

I think the photos show pretty well what your getting.

This has the correct bead at the top, so it is a complete sheet metal replacement needing no original parts.

You could make the inner structure from angle iron if your missing the part entirely.

$250 + shipping
or trade for Winfield carburetor or parts, T thru Y-block Speed Equipment, or iron side v8-60 engine. Really anything early ford of similar value.

thanks
Zach

outside

inside

The racecar project

SUHRsc · 12-29-2013, 06:29 PM

Still have this panel

SUHRsc · 03-21-2014, 06:58 AM

back to the top

SUHRsc · 10-28-2016, 08:54 AM

Sponsored Links (Register now to hide all advertisements)

Sold!

12-02-2013, 08:04 PM	#1
SUHRsc Senior Member Join Date: May 2010 Location: near Hershey, PA Posts: 875	Left side "bun" panel replacement 26/7 roadster City: Grantville State: PA Price: $250 I started making this panel for my 26-27 roadster racecar but then decided to make the entire side of the car from one piece, eliminating the door, etc. This is not perfect as I just stopped working on it when I changed my mind about the project.. has a couple dings and whatnot that will need attention You will need to add your own bracing and then finish out a few areas I think the photos show pretty well what your getting. This has the correct bead at the top, so it is a complete sheet metal replacement needing no original parts. You could make the inner structure from angle iron if your missing the part entirely. $250 + shipping or trade for Winfield carburetor or parts, T thru Y-block Speed Equipment, or iron side v8-60 engine. Really anything early ford of similar value. thanks Zach outside inside The racecar project __________________ -WANTED- Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads Last edited by SUHRsc; 12-03-2013 at 08:13 AM.

12-29-2013, 06:29 PM	#2
SUHRsc Senior Member Join Date: May 2010 Location: near Hershey, PA Posts: 875	Re: Left side "bun" panel replacement 26/7 roadster Still have this panel __________________ -WANTED- Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads

03-21-2014, 06:58 AM	#3
SUHRsc Senior Member Join Date: May 2010 Location: near Hershey, PA Posts: 875	Re: Left side "bun" panel replacement 26/7 roadster back to the top __________________ -WANTED- Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads

10-28-2016, 08:54 AM	#4
SUHRsc Senior Member Join Date: May 2010 Location: near Hershey, PA Posts: 875	Re: Left side "bun" panel replacement 26/7 roadster Sponsored Links (Register now to hide all advertisements) Sold! __________________ -WANTED- Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads