|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-19-2015, 08:16 AM | #1 |
Senior Member
Join Date: Nov 2011
Location: Gonzales, LA
Posts: 457
|
33-34 Brake/Clutch pedal assembly question
I am reassembling my 33 coupe and I have mounted the pedal assembly but there is a spring that attaches to the clutch pedal and I don't know where the other end attaches.
Can someone enlighten me? Thanks! Brad
__________________
Brad Williamson |
10-19-2015, 11:29 AM | #2 |
Senior Member
Join Date: Sep 2012
Location: Calgary Alberta
Posts: 133
|
Re: 33-34 Brake/Clutch pedal assembly question
I believe it goes to the frame to keep the release bearing off the pressure plate
in the out position. Last edited by Flowmeister; 10-19-2015 at 12:08 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
10-19-2015, 11:57 AM | #3 |
Junior Member
Join Date: May 2013
Location: Marblehead MA
Posts: 29
|
Re: 33-34 Brake/Clutch pedal assembly question
This photo might help
|
10-19-2015, 12:26 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
|
Re: 33-34 Brake/Clutch pedal assembly question
Brad , Spring pics look OK . The hole you need is above the pedal bracket directly behind the pin .
|
10-19-2015, 12:40 PM | #5 |
Senior Member
Join Date: Nov 2011
Location: Gonzales, LA
Posts: 457
|
Re: 33-34 Brake/Clutch pedal assembly question
Thanks guys!
Looks like my pin is in backwards too which explains why I could not find the correct whole.
__________________
Brad Williamson |
10-19-2015, 01:52 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 4,725
|
Re: 33-34 Brake/Clutch pedal assembly question
Sponsored Links (Register now to hide all advertisements)
|
10-19-2015, 02:15 PM | #7 |
Senior Member
Join Date: May 2010
Location: Rogersville, TN
Posts: 795
|
Re: 33-34 Brake/Clutch pedal assembly question
Good info, that I needed also! THANKS!
|
10-19-2015, 02:31 PM | #8 |
Senior Member
Join Date: Nov 2011
Location: Gonzales, LA
Posts: 457
|
Re: 33-34 Brake/Clutch pedal assembly question
I don't have one for the brake pedal. Thanks for the info Terry.
__________________
Brad Williamson |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|