|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-20-2010, 01:56 AM | #1 |
Senior Member
Join Date: May 2010
Location: West Michigan
Posts: 1,218
|
Powder Coating Heads
Anyone ever have any experience powder coating cast iron heads ('36)? Does the powder coating cause any cooling problems?
Tom |
10-20-2010, 03:50 AM | #2 |
Senior Member
Join Date: Aug 2010
Location: Lead. South Dakota
Posts: 963
|
Re: Powder Coating Heads
I do not know if the powder coating can take the heat.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-20-2010, 03:58 AM | #3 |
Member
Join Date: May 2010
Location: Brooklyn NY
Posts: 38
|
Re: Powder Coating Heads
I had my heads powder coated and they are holding up good I am sorry i did not have them coated on the inside as well. Jack
|
10-20-2010, 04:04 AM | #4 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,828
|
Re: Powder Coating Heads
I had an Indian motocycle with powder coated barrels. [Air cooled motor] This machine was also stroked, and I had no problems from the powder coating. Brian
|
10-20-2010, 04:39 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 157
|
Re: Powder Coating Heads
Did my 35 heads and intake this past spring, with no problems. Chet/Ma.
|
10-20-2010, 08:12 AM | #6 |
Senior Member
Join Date: May 2010
Location: Millersport, central ohio
Posts: 668
|
Re: Powder Coating Heads
Sponsored Links (Register now to hide all advertisements)
|
10-20-2010, 08:26 AM | #7 |
Senior Member
Join Date: Aug 2010
Location: Sevierville, Tenn.
Posts: 391
|
Re: Powder Coating Heads
Gasoline or oil leaks may/will discolor the powdercoat and you can't do anything about it.
|
10-20-2010, 10:30 AM | #8 |
Senior Member
Join Date: May 2010
Location: Forest Park, IL
Posts: 590
|
Re: Powder Coating Heads
Wouldn't that hold in more heat?
__________________
Obsessed with all things 1936 Ford since birth... thanks Dad. |
10-20-2010, 10:38 AM | #9 |
Senior Member
Join Date: May 2010
Posts: 157
|
Re: Powder Coating Heads
No it was more like alum. color. I have had no issues with heat. And as far as staining goes, even the alum. cast head will stay stained from gas or oil. The only draw back is the bucks that it cost. Chet/Ma.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|