Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-17-2019, 08:10 PM   #1
bullrunmotor
Senior Member
 
Join Date: May 2010
Location: Virginia
Posts: 139
Default Torque value fors 292 and pcv reccomendation

Anyone got a torque chart stating what the bolts that draw down the oil galley cover should be and also the intake manifold bolts torue values are . Also-does anyone know of what pcv valve might fit the opening where the draft tube attaches? Thanks in advance
bullrunmotor is offline   Reply With Quote
Old 10-17-2019, 08:14 PM   #2
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 2,501
Default Re: Torque value fors 292 and pcv reccomendation

Both specs should be in the shop manual.
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-17-2019, 11:35 PM   #3
KULTULZ
Senior Member
 
KULTULZ's Avatar
 
Join Date: Aug 2012
Location: Somewhere Between Lost and Found
Posts: 2,219
Post Re: Torque value fors 292 and pcv reccomendation

Quote:
Originally Posted by bullrunmotor View Post

Anyone got a torque chart stating what the bolts that draw down the oil galley cover should be and also the intake manifold bolts torue values are .

Also-does anyone know of what pcv valve might fit the opening where the draft tube attaches? Thanks in advance
If you don't have a manual I will post the torque values if needed.

As for the valley pan, the replacement grommets are too thick for some applications and may cause the fastener to hit the bottom of the intake.

What car and engine do have in regard to PCV?

EDIT -

Here is a torque value chart - http://yblockguy.com/techtips/yblocktorquetable.html

If not enough let me know.
Attached Images
File Type: jpg Valley Pan Fastener - Interference.jpg (64.9 KB, 7 views)
__________________

My LITTLE THUMB SCREW asks one night -

"Let's watch a good horror movie tonight..."

'OK .... Where are our wedding videos?"

And then the fight started ...



Last edited by KULTULZ; 10-17-2019 at 11:47 PM.
KULTULZ is offline   Reply With Quote
Old 10-18-2019, 08:43 AM   #4
bullrunmotor
Senior Member
 
Join Date: May 2010
Location: Virginia
Posts: 139
Default Re: Torque value fors 292 and pcv reccomendation

Kultutz-thanks for the torque spec on the intake manifold bolts as I don't have a manual.
do you have a publication for specs on the 2 bolts that hold the oil galley cover pan. I am thinking about replacing the oil draft tube with a PCV valve on 56 Ford Fairlane with 292. thanks again for any suggestions
bullrunmotor is offline   Reply With Quote
Old 10-18-2019, 11:49 AM   #5
KULTULZ
Senior Member
 
KULTULZ's Avatar
 
Join Date: Aug 2012
Location: Somewhere Between Lost and Found
Posts: 2,219
Smile Re: Torque value fors 292 and pcv reccomendation

Quote:
Originally Posted by bullrunmotor View Post

... do you have a publication for specs on the 2 bolts that hold the oil galley cover pan.
2.0 to 2.5 Ft Lbs - FORD SHOP MANUAL

Just make sure the grommet used isn't too think.
__________________

My LITTLE THUMB SCREW asks one night -

"Let's watch a good horror movie tonight..."

'OK .... Where are our wedding videos?"

And then the fight started ...


KULTULZ is offline   Reply With Quote
Old 10-18-2019, 12:02 PM   #6
56sedandelivery
Senior Member
 
56sedandelivery's Avatar
 
Join Date: Mar 2018
Location: Arkansas
Posts: 151
Default Re: Torque value fors 292 and pcv reccomendation

Quote:
Originally Posted by KULTULZ View Post
2.0 to 2.5 Ft Lbs - FORD SHOP MANUAL

Just make sure the grommet used isn't too think.

Ill think about it.
56sedandelivery is offline   Reply With Quote
Old 10-19-2019, 01:09 PM   #7
blucar
Senior Member
 
blucar's Avatar
 
Join Date: Jul 2010
Location: Ventura, CA
Posts: 1,847
Default Re: Torque value fors 292 and pcv reccomendation

A PCV system from a '63-64 292 F-100/350 is a perfect fit for all early Y-Blocks.
Attached Images
File Type: jpg 57 312 PCV.1.jpg (53.0 KB, 25 views)
File Type: jpg 57 312 PCV.jpg (41.1 KB, 28 views)
__________________
Bill.... 36 5 win cpe
blucar is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:37 AM.