|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-30-2011, 05:05 PM | #1 |
Junior Member
Join Date: May 2010
Posts: 28
|
Light switch rod
Hi,
Installed a f-100 modified steering box for the model A's, in my 1930 model Pickup, and need to know how much of the light switch rod (by inches) sticks out the end. As the rod I have is to short to hook the spring and switch spider on. Thank you Mike |
09-30-2011, 05:52 PM | #2 |
Senior Member
Join Date: May 2010
Location: ca.
Posts: 2,522
|
Re: Light switch rod
how long is your rod ?????? i have an extra .......... steve
__________________
V4f |
Sponsored Links (Register now to hide all advertisements) |
|
09-30-2011, 06:03 PM | #3 |
Junior Member
Join Date: May 2010
Posts: 28
|
Re: Light switch rod
Steve
Not sure as it's installed in the pickup and would have to remove the steering column from pickup to pull it out to check the length. But I'm sure I have to remove in time to make right. Mike |
10-01-2011, 07:20 AM | #4 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: Light switch rod
The rod stick out 1 1/4" from the plate that bolts on the end of the steering box to hold the bail,
|
10-01-2011, 06:47 PM | #5 |
Junior Member
Join Date: May 2010
Posts: 28
|
Re: Light switch rod
Thank you, jw
Mike |
10-02-2011, 11:34 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: Light switch rod
Sponsored Links (Register now to hide all advertisements)
Not the clearest pic, but it may help.
__________________
http://www.abarnyard.com/ |
|
|
Sponsored Links (Register now to hide all advertisements) |
|