|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-15-2010, 08:30 PM | #1 |
Junior Member
Join Date: May 2010
Location: phoenix, az
Posts: 18
|
Will a 26-27 visor fit a 28-29 pickup?
I would like a metal / not upholstered visor for my pickup and wondering if they are interchangeable. Any and all info greatly appreciated, Thanks, Daniel
|
07-17-2010, 01:14 PM | #2 |
Junior Member
Join Date: May 2010
Location: phoenix, az
Posts: 18
|
Re: Will a 26-27 visor fit a 28-29 pickup?
Anybody?
|
Sponsored Links (Register now to hide all advertisements) |
|
07-17-2010, 02:22 PM | #3 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: Will a 26-27 visor fit a 28-29 pickup?
I thought the A pillars were the same( 26-27 car and 28-29 pu ), but Rod said,
no on the windshield to you, I'm not sure now. Try the T guys. |
07-19-2010, 12:47 AM | #4 |
Senior Member
Join Date: May 2010
Location: Hangtown, CA
Posts: 556
|
Re: Will a 26-27 visor fit a 28-29 pickup?
Sponsored Links (Register now to hide all advertisements)
I haven't removed a visor from a T, but my 29 CC Pickup has wood screws attaching the top rear of the visor along the underside of the front wood header. I just re-read the original question and am now thinking that you may want to use the visor from a coupe or sedan on your 29 CC Pickup. If that is what you are wanting to do then the answer is no, not without drilling some new holes in your door pillar. I welded up the holes in my pillar from someone doing just that. Last edited by Dan Partain; 07-19-2010 at 12:53 AM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|