31 slant window glass chanel

[bobmc]

I am working on my front passenger door glass on my 31 slant widow. The glass had a crack in it and I decided to make a winter project out of it. I disassemble the old glass and had a new one cut. Now I am attempting to reassemble and do not remember which side of the window channel faces inward when putting it on the glass. Pictures would help.


thanks


bob

[duke36]

Before installing glass in channel, take the loose channel and see how it fits with the regulator arms rollers. .The arms should be on the inside face of the installed channel slots and so that the rollers slide in the channel track..

[burner31]

If this is what you are talking about...
the two inner holes, the dimpled recess should be in towards the door.

[bobmc]

burner 31


If looking at your picture and that is the way it is installed, what I am seeing is the inside or interior of the car. correct?

[burner31]

Yes, as you are working on it/looking at it

[duke36]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by bobmc

I am working on my front passenger door glass on my 31 slant widow. The glass had a crack in it and I decided to make a winter project out of it. I disassemble the old glass and had a new one cut. Now I am attempting to reassemble and do not remember which side of the window channel faces inward when putting it on the glass. Pictures would help.


thanks


bob

photo from the net