|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-31-2011, 07:26 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Murrieta, CA
Posts: 637
|
8ba anti chatter bars
*UPDATE* so I have an 8ba in a 40 pickup. Everyone screamed that anti chatter bars are a must with a 40 stock rear end. That said, I got a pair of brackets from Mark Seitz....awesome job. Mount great to trans.
However, my stock chatter bars are too long. If you have used the 40 anti chatter bars with a 8ba and Mark Seitz brackets....chime in. PLEASE HELP. Thanks |
01-31-2011, 08:01 PM | #2 | |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,942
|
Re: 8ba anti chatter bars
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
02-01-2011, 01:37 AM | #3 |
Senior Member
Join Date: Jan 2011
Location: Christchurch, New Zealand
Posts: 250
|
Re: 8ba anti chatter bars
I drilled the 8BA block in the standard location to fit to a 35 ford and modified the threaded portion to the length required to get a full nut and some through the block. Just mounted the rear end as normal. Worked well and was easy to do. Using a truck sump and bell.
__________________
Life is not a dress rehearsal... |
02-01-2011, 10:01 AM | #4 |
Senior Member
Join Date: May 2010
Location: Delta, PA
Posts: 525
|
Re: 8ba anti chatter bars
I used his brackets on my 37, just threaded the rods deeper. Zeke
__________________
Only problem with retirement is never a day off |
02-01-2011, 11:00 AM | #5 |
Senior Member
Join Date: May 2010
Location: Corunna, Ontario, Canada
Posts: 309
|
Re: 8ba anti chatter bars
I didn't use the anti-chatter rods when I put the 8BA into my 34 pickup. I don't notice any adverse effects. Am I missing something? Byron.
__________________
IT'S NOT YOUR AGE, IT'S YOUR ATTITUDE ! |
02-05-2015, 11:04 PM | #6 |
Senior Member
Join Date: Feb 2013
Posts: 511
|
Re: 8ba anti chatter bars
Sponsored Links (Register now to hide all advertisements)
|
02-05-2015, 11:07 PM | #7 |
Senior Member
Join Date: May 2010
Location: Blythewood, SC
Posts: 242
|
Re: 8ba anti chatter bars
Zeke or anyone who has the info, will you please PM or e-mail the Phone number or address for Mark Seitz? Thanks, Tom Byrd, 803-413-1287 E-mail, toms40insc@ bellsouth.net
|
02-05-2015, 11:22 PM | #8 |
Senior Member
Join Date: May 2010
Location: Mesquite, NV / Gurnee, IL
Posts: 298
|
Re: 8ba anti chatter bars
The brackets are also on EBay.
|
02-20-2015, 02:49 PM | #9 |
Senior Member
Join Date: May 2013
Location: Pa.
Posts: 2,171
|
Re: 8ba anti chatter bars
__________________
Nomad |
02-20-2015, 04:53 PM | #10 |
Senior Member
Join Date: May 2013
Location: Pa.
Posts: 2,171
|
Re: 8ba anti chatter bars
Zeke, Fairlane500, & 19Fordy, I like the method / looks on how you resolved. Looks very stock. unless someone brought it to attention no one would know. I have used a bracket adapter as I installed the engine before realizing it would be a prob. Thought of drilling out the bell and modifying the rod by eliminating the shoulder and threading the rod more as you did which would have been easy during the swap. I thought I did all the research but the chatter bars got by me. Didn't want to pull the engine again just to slide the rods in the drilled out holes so went with adapter brackets. works fine but definitely shows as nothing like stock.
__________________
Nomad |
08-15-2017, 09:53 AM | #11 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 167
|
Re: 8ba anti chatter bars
Where can I get a pair of Mark Seitz brackets?
|
01-19-2019, 04:38 PM | #12 |
Senior Member
Join Date: May 2010
Posts: 398
|
Re: 8ba anti chatter bars
^^^^^^^^^^ me too
|
01-19-2019, 11:09 PM | #13 | |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: 8ba anti chatter bars
Quote:
...Mark Seitz @ 330-980-0636. He makes an adapter to bolt on to your late model flathead and your anti chatter rods fit perfectly.... They are about $45, and that includes postage. His address is 5345 Parkman Road NW, Warren,OH 44481.... |
|
04-05-2020, 07:09 AM | #14 |
Junior Member
Join Date: Aug 2019
Posts: 8
|
Re: 8ba anti chatter bars
UPDATE:
I just talked to Mark Seitz today, April 5, 2020. His correct phone number is 234-600-8804 and he charges $60 which includes shipping for a pair of his brackets. His address is the same: 5345 Parkman Road NW, Warren,OH 44481 |
04-05-2020, 09:46 AM | #15 |
Senior Member
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 3,018
|
Re: 8ba anti chatter bars
When I put the 8ba in my '39 p/u I didn't install anti-chatter rods. The clutch would chatter when backing up. I jury rigged some rods and instant no more clutch chatter in reverse. I had looked at the brackets that Mark sells and if I have to pull the floor boards up in the future I'll up date at that time.
__________________
Making the simple complicated for over 30 years. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|