|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-01-2020, 04:58 PM | #1 |
Junior Member
Join Date: Sep 2018
Posts: 5
|
1939 Ford standard
Hello, I have a 1939 ford standard with the 85 horsepower flathead v8 engine. I am hoping to get some advice on how the condenser is removed. I can not see a way to get to the bottom flathead screw that holds it in place. Any advice would be helpful.
|
04-01-2020, 06:42 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,017
|
Re: 1939 Ford standard
Welcome. Unfortunately you placed your question in a section intended for questions to the editors about the site. Few people read this section and even fewer respond to a question here. Leave it here (too complicated/costly to move it) but place your question here: https://www.fordbarn.com/forum/forumdisplay.php?f=4
Charlie Stephens |
Sponsored Links (Register now to hide all advertisements) |
|
04-03-2020, 02:45 PM | #3 |
Junior Member
Join Date: Sep 2018
Posts: 5
|
Re: 1939 Ford standard
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|