For Sale - Original Seemed Cutout To Terminal Box Conduit

[frank55a]

Sponsored Links (Register now to hide all advertisements)

For Sale - Original Seemed Cutout To Terminal Box Conduit

Per the Judging Standards "From introduction through February 1930 terminal box-to-cutout and starter switch-to-terminal box wires were protected in a seamed steel tubing (conduit) painted gloss black. The hole in the bottom of the conduit had a reinforcing rim." There is a weld repair on the bottom and sides adjacent to the hole. However, the reinforcing rim is missing but there is no evidence that the lengthwise ends of the hole were repaired nor that there was a reinforcing rim. It is possible for the 27s there was no reinforcing rim. To determine if there was or was not a rim you would have to obtain a copy of drawing A-14575 dated 8/23/27. Otherwise the conduit is the same as the conduit with the rim and is in good condition. You just need to clean up the repair and add the wiring.

NOTE: I do have a copy of drawing A-14575-A1 which shows the reinforcing rim and measurements and pictures of an original reinforcing rim which I will include with the conduit.

Price is $50, plus shipping, USA buyers only. No Pay-Pal. (Depending on your location, UPS shipping will range between $12-18 within the lower 48.)

Contact Frank at [email protected]