The Ford Barn

flat-v8 · 01-07-2014, 07:04 PM

Pretty neat video!
http://youtu.be/Qh2LWwZI1LM

old Tom · 01-07-2014, 07:43 PM

That was great thank you

Ross F-1 · 01-07-2014, 08:43 PM

Pretty cool! Of course, you can't watch just one video, the links grab your attention... an hour later...

Y-Blockhead · 01-07-2014, 08:56 PM

Sponsored Links (Register now to hide all advertisements)

Very cool.

We did something similar years ago on a slow day at the shop with a twin cylinder 2 stroke Yamaha. Took 1 of the heads off and fired it up. We connect an adjustable advance timing light and by changing the setting we could "Stop" the piston at different positions. You could actually see the droplets of fuel in the ports.

Fun times.

Thanks for sharing and bringing back a long forgotten memory.

01-07-2014, 07:04 PM	#1
flat-v8 Senior Member Join Date: Nov 2010 Location: Magnolia Texas Posts: 586	Flathead 4 cyl cut open & running! Pretty neat video! http://youtu.be/Qh2LWwZI1LM

01-07-2014, 07:43 PM	#2
old Tom Senior Member Join Date: May 2010 Posts: 195	Re: Flathead 4 cyl cut open & running! That was great thank you

01-07-2014, 08:43 PM	#3
Ross F-1 Senior Member Join Date: Nov 2010 Location: NM Posts: 2,438	Re: Flathead 4 cyl cut open & running! Pretty cool! Of course, you can't watch just one video, the links grab your attention... an hour later... __________________ '52 F-1, EAB flathead

01-07-2014, 08:56 PM	#4
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,849	Re: Flathead 4 cyl cut open & running! Sponsored Links (Register now to hide all advertisements) Very cool. We did something similar years ago on a slow day at the shop with a twin cylinder 2 stroke Yamaha. Took 1 of the heads off and fired it up. We connect an adjustable advance timing light and by changing the setting we could "Stop" the piston at different positions. You could actually see the droplets of fuel in the ports. Fun times. Thanks for sharing and bringing back a long forgotten memory.