|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-16-2020, 06:10 PM | #21 |
Member
Join Date: Mar 2017
Location: Ontario, Canada
Posts: 54
|
Re: Question for ‘39 pickup experts
Hmmm, I've been considering Not Using the outer trim ring and centre bar that came with my '39 Pickup.
I was going to list it in the want ad section after I finish my project - don't usually sell anything until it is all done. Not sure I want to sell just the centre strip??? What is the outer ring and the strip worth? |
12-16-2020, 06:34 PM | #22 |
Member
Join Date: Aug 2015
Location: San Jose, CA
Posts: 46
|
Re: Question for ‘39 pickup experts
Dave Turner (Turner Stainless) did a fantastic restoration of both my center and surround from pretty well beat up originals. He is early 80s, and I can share contact information if needed by email
Mark Sent from my iPhone using Tapatalk |
Sponsored Links (Register now to hide all advertisements) |
|
12-16-2020, 11:43 PM | #23 |
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 1,162
|
Re: Question for ‘39 pickup experts
This is what I did on my pickup. I used a flexible plastic, stick on automotive trim. The V8 emblem is from a newer Ford Explorer. Not stock but it looks great so it works for me.
|
12-17-2020, 09:21 AM | #24 | |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,744
|
Re: Question for ‘39 pickup experts
Quote:
|
|
12-17-2020, 03:41 PM | #25 |
Member
Join Date: Mar 2017
Location: Ontario, Canada
Posts: 54
|
Re: Question for ‘39 pickup experts
So, this is what I have...
Bill, will the outer ring fit on your '38? |
12-17-2020, 04:00 PM | #26 |
Senior Member
Join Date: May 2015
Posts: 7,924
|
Re: Question for ‘39 pickup experts
Sponsored Links (Register now to hide all advertisements)
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
12-17-2020, 04:01 PM | #27 | |
Senior Member
Join Date: May 2015
Posts: 7,924
|
Re: Question for ‘39 pickup experts
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
12-17-2020, 05:19 PM | #28 |
Senior Member
Join Date: May 2010
Location: Edgefield, SC
Posts: 809
|
Re: Question for ‘39 pickup experts
To the best of my knowledge, the outer trim rings for 38 and 39 pickups/trucks interchange. The center grill trim for 38 and 39 are not the same. The 39 center stainless is very difficult to find. I sold a NOS one to a person on Fordbarn for $300 several years back. I sold a NOS one on EBay that ended up going for a bit over $600. I sold a restored one on Ebay that also went for a bit over $600. I no longer have any extra 39 grill stainless. It took me several years to find the ones I had...I was told by a former Fordbarner that Drake was going to start reproducing them or I would not have sold the ones I had. To the best of my knowledge, Drake never made any.
|
12-17-2020, 05:29 PM | #29 |
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 1,162
|
Re: Question for ‘39 pickup experts
The '38 and '39 outer rims are the same. The centers of the two grills are totally different so the center trims do not interchange.
I have a '39 grill on my '38 truck and have trim for both '38 and '39 but mine like so many others are beat up. |
12-17-2020, 06:38 PM | #30 |
Senior Member
Join Date: May 2015
Posts: 7,924
|
Re: Question for ‘39 pickup experts
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
12-17-2020, 06:51 PM | #31 |
Member
Join Date: Mar 2017
Location: Ontario, Canada
Posts: 54
|
Re: Question for ‘39 pickup experts
Hi Bill,
Looks like you could use the outer trim ring (if you are interested) and Kevin could use the centre strip if he is interested. I am in need of some parts for my truck, maybe we could work something out. George |
12-17-2020, 07:16 PM | #32 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,259
|
Re: Question for ‘39 pickup experts
I think that looks great, and only the most knowledgeable Ford enthusiasts would be able to know it wasn't factory. You're my kind of guy!
Last edited by tubman; 12-17-2020 at 08:06 PM. |
12-17-2020, 07:57 PM | #33 |
Member
Join Date: Mar 2017
Location: Ontario, Canada
Posts: 54
|
Re: Question for ‘39 pickup experts
Kevin / Bill, I have pm'd both of you.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|