The Ford Barn

Ziffer · 09-30-2013, 12:10 PM

I am in need of the panel that goes between the quarters and above the decklid. It also forms the back of the driver's compartment. I would take a used one if it is repairable.

Thanks
Z

mfagan · 09-30-2013, 12:24 PM

Steve's Auto Restorations is a good place to start.

Steve Staysko · 09-30-2013, 12:44 PM

Sponsored Links (Register now to hide all advertisements)

I’ve found that most of the 34 reproduction replacement panels look great out of the box but they don't quite fit and some need extensive modifications so they are dimensionally correct. I bought a Steve’s roadster panel above the deck lid and it was made flat and if you see an original panel it has a curvature. It was fortunate that I’m working with an OEM roadster body and have the original body dimensions as a go-by so we put the curvature back into the panel. In discussion with Ed Solari I’m positive that he told me that the one he had purchase had the curvature but I can remember whose panel he bought.

09-30-2013, 12:10 PM	#1
Ziffer Senior Member Join Date: May 2010 Location: Michigan Posts: 171	Who makes 1933-1934 Roadster Panel above decklid I am in need of the panel that goes between the quarters and above the decklid. It also forms the back of the driver's compartment. I would take a used one if it is repairable. Thanks Z

09-30-2013, 12:24 PM	#2
mfagan Senior Member Join Date: May 2010 Location: Kaufman, TX Posts: 822	Re: Who makes 1933-1934 Roadster Panel above decklid Steve's Auto Restorations is a good place to start.

09-30-2013, 12:44 PM	#3
Steve Staysko Senior Member Join Date: May 2010 Location: Dewinton, Alberta, Canada Posts: 463	Re: Who makes 1933-1934 Roadster Panel above decklid Sponsored Links (Register now to hide all advertisements) I’ve found that most of the 34 reproduction replacement panels look great out of the box but they don't quite fit and some need extensive modifications so they are dimensionally correct. I bought a Steve’s roadster panel above the deck lid and it was made flat and if you see an original panel it has a curvature. It was fortunate that I’m working with an OEM roadster body and have the original body dimensions as a go-by so we put the curvature back into the panel. In discussion with Ed Solari I’m positive that he told me that the one he had purchase had the curvature but I can remember whose panel he bought.