36 Car: Where does this glove box door clip go...?

[cajunfirehawk]

Need a pic of this clip installed on a 36 car to see how it helps keep the door closed? Have the clip but it was loose in a parts box and need to install it to keep the door shut...thanks

[RalphM]

It led between the lip on the door and the lip on the dash, curved side up.

[RalphM]

Like this

[my4dv8]

Yes , you need two of these .

[cajunfirehawk]

Originally Posted by RalphM

Like this

Thanks RalphM!

[cajunfirehawk]

Sponsored Links (Register now to hide all advertisements)

Update, so this was a fun lil venture , just to confirm, on the hinge strip side, not the glove box door side, the clips slide between the 2 pcs of metal of the hinge or, between the bottom of the hinge and the dash frame
I put the clips between the two pcs of metal on the glove box side...AND where would one find the two glove box door rubber bumpers at? (to buy)

[TagMan]

The glove box door rubber bumpers are available from most any vendor (Macs, C&G, etc.).
As I recall, there's a "thick" and a "thin" version, depending on the date your car was made.

[RalphM]

Update, so this was a fun lil venture , just to confirm, on the hinge strip side, not the glove box door side, the clips slide between the 2 pcs of metal of the hinge or, between the bottom of the hinge and the dash frame

Yes it looks like you have them correct, you’ll find if you get a door liner, you may have to move them in towards each other. The liner has notches for the spring clips.