|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-22-2020, 05:02 PM | #1 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
|
1942 to 1948 front and rear end
City:
Montague
State:
California
Price:
Free
I disassembled dune buggy about 35 years ago cus I knew if I kept it my kids would kill themselves on the ranch. We are moving and do not need to take it with me
What I have here is shortened rear end with spring. Nice radius rods (LOL). This is the same as a 1942, 46, 47 and 48 And here is a front axle (bent a little), Wish bone, and no spring. 42,46 and 47 25 bucks takes it. Too heavy to ship. Pickup only. I live an hour south of Medford Oregon or 1 1/2 hours north of Redding California. 7 miles east of Interstate 5. Tim 530 340 1651 Last edited by qmdv; 04-17-2020 at 08:09 PM. |
04-14-2020, 08:42 PM | #2 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
|
Re: 1942 to 1948 front and rear end
I sold the front spring. Take the rest for 25 bucks
|
Sponsored Links (Register now to hide all advertisements) |
|
04-17-2020, 08:10 PM | #3 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
|
Re: 1942 to 1948 front and rear end
I lowered the price to free. Well maybe a 6 pack of DR Pepper. It has to go and I do not want to scrap it.
|
04-21-2020, 08:00 PM | #4 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
|
Re: 1942 to 1948 front and rear end
We sold the ranch and I have to get rid of this stuff. FREE If I had to scrap it I would be haunted for life. I could ship the rear spring or the front axle if necessary. But hen I would want a few bucks for my extra effort
|
05-14-2020, 05:10 PM | #5 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
|
Re: 1942 to 1948 front and rear end
Hey it is still free
|
05-19-2020, 09:45 PM | #6 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
|
Re: 1942 to 1948 front and rear end
Sponsored Links (Register now to hide all advertisements)
|
06-13-2020, 08:20 PM | #7 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
|
Re: 1942 to 1948 front and rear end
Well if I cannot give it away I will sell it for scrap. I think I can get 22 cents per pound from a local guy who accumulates a big load then hauls it to where there is a better price.
|
07-31-2020, 09:12 PM | #8 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 935
|
Re: 1942 to 1948 front and rear end
It will be on the way to China to be melted down if nobody wants it for free. If it goes to china it may come back as vintage chevy parts. That would be shameful
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|