|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-13-2014, 01:14 PM | #1 |
Junior Member
Join Date: Mar 2014
Location: near St Louis, Mo
Posts: 5
|
tudor top material width
I'm preparing to replace the top material on my 28 tudor, when I measure the widest part of the top it is about 62.5 inches. Can I get by with material that is only 63" wide? Any suggestions.
|
05-13-2014, 01:27 PM | #2 |
Senior Member
Join Date: May 2010
Location: North Carolina
Posts: 611
|
Re: tudor top material width
I think it would be extremely difficult to get a nice fitting top with only 1/4 to play with on each side. Almost impossible. You have to be able to pull to get all the wrinkles out and you will not have enough slack to be able to do that. IMHO
|
Sponsored Links (Register now to hide all advertisements) |
|
05-13-2014, 07:05 PM | #3 |
BANNED
Join Date: May 2010
Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto.
Posts: 5,800
|
Re: tudor top material width
It's often been said that there are times in life when you could use a couple extra inches. Like 31Tudor says, it will make a big difference in the way the finished product looks. This is not a time to scrimp !
Wayne |
05-13-2014, 07:52 PM | #4 |
Member
Join Date: Jun 2012
Location: Alton Bay, NH
Posts: 58
|
Re: tudor top material width
I put a top on my 29 last year and I can't imagine having only 1/2 inch to pull, stretch and straighten with. Besides, I think you would need at least an inch on either side to go under the Hide Em.
|
05-13-2014, 08:05 PM | #5 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,384
|
Re: tudor top material width
Are current top kits not wide enough?
__________________
Respecting and Resurrecting Ford Model A's. |
05-13-2014, 10:22 PM | #6 |
Junior Member
Join Date: Mar 2014
Location: near St Louis, Mo
Posts: 5
|
Re: tudor top material width
Sponsored Links (Register now to hide all advertisements)
|
07-20-2014, 10:53 PM | #7 |
Junior Member
Join Date: Jul 2014
Location: Edmonds, WA
Posts: 9
|
Re: tudor top material width
Sunbrella has the canvas material in 80" widths. The material if I remember correctly it is Sunbrella 800.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|