6 volt bulbs

[Ken/Alabama]

Originally Posted by Anteek29

OOPS...The 1156 bulbs are 12 volt - not 6 volt

They do have 1156 in 6 volt but they’re single contact not dual contact like the taillight/ brake light bulbs are.

[40ford]

Ken is this the correct bulbs for tail lights?
https://www.amazon.com/1157-BAY15D-F...xpY2s9dHJ1ZQ==

[Anteek29]

Recently bought some 6 volt 1129 LED bulbs for my '41 p-u brake lights. Was disappointed because I don't see any improvement in lumens compared to the incandescent bulbs.
I did order some 'extra bright' ones on Amazon today, so we'll see. No pun intended.

[Ken/Alabama]

40Ford
Those may work but not the ones I used. Here’s the ones I used.

[petehoovie]

Originally Posted by Ken/Alabama

40Ford
Those may work but not the ones I used. Here’s the ones I used.

[oldskool]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Ken/Alabama

40Ford
Those may work but not the ones I used. Here’s the ones I used.

i ordered these for my 40

[40ford]

Originally Posted by Ken/Alabama

40Ford
Those may work but not the ones I used. Here’s the ones I used.

Ok,thanks Ken.How about the ones you used in the dash,are they LED also?

[Merc Cruzer]

LED non-polarity 6 volt bulbs, Phoenix, AZ:

https://www.ledlight.com/g18-s25-2_6...-polarity.aspx

[Ken/Alabama]

Originally Posted by 40ford

Ok,thanks Ken.How about the ones you used in the dash,are they LED also?

Yes.

[petehoovie]

Originally Posted by 40ford
Ok,thanks Ken.How about the ones you used in the dash,are they LED also?

Originally Posted by Ken/Alabama

Yes.

[mhsprecher]

FWIW, my new 51 converted to 12 v came with red LEDs inside the taillight lens. Couldn’t see them, so I replaced them with white LEDs. What a difference, so don’t think about using red LEDs inside a red lens.