Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-06-2013, 03:38 PM   #61
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: what do you collect of parts ...and how many?

Yo, Bill, When I put up another building with shelves, maybe we can come and get the coffee cans.
Purdy Swoft is offline   Reply With Quote
Old 01-06-2013, 06:57 PM   #62
binkbee
Member
 
Join Date: May 2010
Location: Bowling Green, KY
Posts: 49
Default Re: what do you collect of parts ...and how many?

1-----one each lighting switch body---new-----
2-----two each modern dist upper point plate----
3-----two each sets modern ignition points--new--
4-----one white die-cast water pump packing nut--new--
5-----two each stop light switches--new---
6-----one new starter foot switch-------------------
7-----one new #A-6034-X front engine mount kit------
8-----one new complete Zenith carb rebuils kit w/venturs tube--
9-----one new front crankshsft steel timing gear----------
10----two each new tie rod ends rebuild kits----
11----three new copper engine-to-frame ground straps----
12----one new "lighting wire harness complete w/ switch plate--
13----one new "body' wiring harness---------------
14----one new [old] dist body w/long shaft-----------
15----two each new [old] oil pump & dist main drive ass w/shafts & collars-
16----one each new main oil shaft w/ drive gear-----------
17----three new upper dist shaft drives----
18----one new "old" upper dist shaft drives----
19----one new dist point cam-------------------
20----two each dist cam drive collars-------
21----one new starter Bendix spring------------------
22----one new starter bendix drive collar--------------
23----three new steel hood latches-------
24----two new [old] brass gas shut-off valves-----
25----two new [old] brass water drain valves--
26----one new ratchet nut for front of crankshaft
27----three each new dist rotors-----------
28----seven new carb shafts and vuel vent orfice tubes--
29----one new carb std rebuild kit------
30----one new chrome locking gastank cap----------------
31----two each new [old] starter bendix drives---
32----one rebuild kit for gas tank gage rebuild----------
33----one new {old] dist cap----
34----one new valve lifter removing tool--------
35----"top-of-the-line" delux cylinder head puller [used once]----
36----two new dist point cams------@
37----A new Les Andrews main repair-rebuilding catalog hard cover---
binkbee is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-06-2013, 07:57 PM   #63
Jerry Parr WI
Senior Member
 
Jerry Parr WI's Avatar
 
Join Date: May 2010
Posts: 619
Default Re: what do you collect of parts ...and how many?

Quote:
Originally Posted by Purdy Swoft View Post
A few more.
I have some of those myself.

Jerry Parr WI is offline   Reply With Quote
Old 01-06-2013, 08:15 PM   #64
1crosscut
Senior Member
 
1crosscut's Avatar
 
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 1,907
Default Re: what do you collect of parts ...and how many?

Which one of you guys is hoarding (oops, sorry) collecting all the used fender bolts???? I sure can't seem to find any.
Dave
__________________
Dave / Lincoln Nebraska
1crosscut is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:52 PM.