The Ford Barn

Duke · 03-22-2023, 12:19 PM

Hi,
Can this gear be used with the 1940 a later shafts and cluster?

Flathead Fever · 03-22-2023, 01:16 PM

If you look up the different main output shaft numbers in the Ford parts book it shows which gear part numbers, go on which main shafts. That way you can see which gears are interchangeable.

Juergen · 03-23-2023, 08:14 AM

Sponsored Links (Register now to hide all advertisements)

Flathead fever is right. The general answer is no. Some of the truck clusters kept the spur 1st and second gears and the 50 up output shafts had a different twist.

03-22-2023, 12:19 PM	#1
Duke Senior Member Join Date: May 2010 Location: Vernon, BC Posts: 202	68-7100-B low reverse Hi, Can this gear be used with the 1940 a later shafts and cluster?

03-22-2023, 01:16 PM	#2
Flathead Fever Senior Member Join Date: May 2010 Location: Yucaipa, CA Posts: 1,095	Re: 68-7100-B low reverse If you look up the different main output shaft numbers in the Ford parts book it shows which gear part numbers, go on which main shafts. That way you can see which gears are interchangeable.

03-23-2023, 08:14 AM	#3
Juergen Senior Member Join Date: May 2010 Posts: 500	Re: 68-7100-B low reverse Sponsored Links (Register now to hide all advertisements) Flathead fever is right. The general answer is no. Some of the truck clusters kept the spur 1st and second gears and the 50 up output shafts had a different twist.