|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
04-19-2014, 09:01 AM
|
#1 |
|
Senior Member
Join Date: May 2010
Posts: 315
|
cyl size limit of 32-34 block?
Need to know the bore limits of 32-34 block? Also limit if to be sleeved?
Thanks coup34 |
|
|
|
04-19-2014, 05:31 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Oamaru, New Zealand
Posts: 419
|
Re: cyl size limit of 32-34 block?
I bored mine out to.080 o/s....done 10,000 miles so far, no problems.
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
04-19-2014, 07:06 PM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: cyl size limit of 32-34 block?
With a '32 block, anything beyond +.040 is an invitation to trouble and if it is a early '32 block beyond +.030 is a risk. You have more leeway with the '33 and '34 blocks, especially the latter.
|
|
|
|
|
04-19-2014, 08:48 PM
|
#4 |
|
Senior Member
Join Date: May 2010
Location: Gardiner Me.
Posts: 4,200
|
Re: cyl size limit of 32-34 block?
I don't recommend over .060 on any block up 1936. 37 and up will go .125 usually with no problem. I did bore a 35 .080 over awhile ago, BOY, is it hard to find .080 flattop pistons. EGGE has them $350.00 set. Walt
|
|
|
|
|
04-19-2014, 09:56 PM
|
#5 |
|
Senior Member
Join Date: May 2010
Posts: 315
|
Re: cyl size limit of 32-34 block?
Sponsored Links (Register now to hide all advertisements)
coup34 |
|
|
|
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 10:46 PM.