Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-06-2020, 10:07 PM   #1
zoegrant
Senior Member
 
zoegrant's Avatar
 
Join Date: Jun 2010
Location: tolland CT
Posts: 756
Default Missing hand throtle part

On my 36 coupe which has a flathead with a Ford EAB carb there was a piece that connects the hand throttle rod to the carb...well it fell off on a ride the other day. The missing part appeared to be bronze or brass and was shaped like a little helmet and inside was a spring. This little helmet fit over a( T )shaped piece that the hand throttle rod is hooked to.
Anyone know what I am talking about ? If so, where can I get one and what is it called ?
zoegrant is offline   Reply With Quote
Old 06-06-2020, 10:33 PM   #2
FlatheadTed
Senior Member
 
FlatheadTed's Avatar
 
Join Date: May 2010
Location: Auckland
Posts: 4,280
Send a message via AIM to FlatheadTed
Default Re: Missing hand throtle part

Zig you will need to buy the whole length of rod that is joined under the dash its about 3 ft and crimped to the dash knobs ,any early Ford suplier such as Carpenter ,Macs ,Speedway ,
__________________
http://www.flatheadted.com
FlatheadTed is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-07-2020, 06:20 AM   #3
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 3,542
Default Re: Missing hand throtle part

Vintage Speed has nearly all the parts for the 94. Check out their web site. What ya doing with a EAB on a 36? How about a photo of your engine.
Terry,OH is offline   Reply With Quote
Old 06-07-2020, 06:25 AM   #4
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 3,374
Default Re: Missing hand throtle part

This what you need?
deuce lover is offline   Reply With Quote
Old 06-07-2020, 07:06 AM   #5
GaryU.
Senior Member
 
GaryU.'s Avatar
 
Join Date: May 2010
Location: Madison,Wisconsin
Posts: 567
Default Re: Missing hand throtle part

If what deuce posted is the part (my thoughts as well), you should contact CharlieNY as he probably has a box of them for his carb repairs.
GaryU. is offline   Reply With Quote
Old 06-07-2020, 08:23 AM   #6
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 6,672
Default Re: Missing hand throtle part

Sponsored Links (Register now to hide all advertisements)
And it bears repeating again. "Charlie NY" will serve you a LOT better than "Charlie Price" (Vi8ntage Speed).
tubman is offline   Reply With Quote
Old 06-07-2020, 04:48 PM   #7
terry
Senior Member
 
Join Date: May 2010
Posts: 121
Default Re: Missing hand throtle part

Help me out deuce lover, does that end piece on the right also have holes in it to put a holder through, as well, to keep it from falling off the shaft? At least that is what's on my throttle at the carb on my 36. A cotter pin will suffice here.
terry is offline   Reply With Quote
Old 06-07-2020, 10:20 PM   #8
zoegrant
Senior Member
 
zoegrant's Avatar
 
Join Date: Jun 2010
Location: tolland CT
Posts: 756
Default Re: Missing hand throtle part

Thank you Deuce...just what I needed....bought one on Ebay….
zoegrant is offline   Reply With Quote
Old 06-07-2020, 10:22 PM   #9
scicala
Senior Member
 
scicala's Avatar
 
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 2,944
Default Re: Missing hand throtle part

Quote:
Originally Posted by terry View Post
Help me out deuce lover, does that end piece on the right also have holes in it to put a holder through, as well, to keep it from falling off the shaft? At least that is what's on my throttle at the carb on my 36. A cotter pin will suffice here.
The piece on the right is slotted inside the hole. You push it in against the spring/lever and then rotate it 90 degrees to lock it on the throttle shaft.

Sal
scicala is offline   Reply With Quote
Old 06-08-2020, 06:40 AM   #10
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 3,542
Default Re: Missing hand throtle part

The above parts are for the 94 if you have a Stromberg they look like the pieces below which use a tapered pin to fit into a hole in the throttle shaft for attachment.
Attached Images
File Type: jpg DSC03046.JPG (136.1 KB, 9 views)
File Type: jpg DSC03044.JPG (131.0 KB, 9 views)
Terry,OH is offline   Reply With Quote
Old 06-08-2020, 08:00 AM   #11
terry
Senior Member
 
Join Date: May 2010
Posts: 121
Default Re: Missing hand throtle part

Yes, that's my set-up on my Stromberg 48. Thanks, Terry. Didn't mean to confuse people. terry
terry is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:51 PM.