|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-15-2018, 04:47 PM | #1 |
Senior Member
Join Date: May 2010
Location: Taranaki, New Zealand
Posts: 922
|
leaking Stromberg carburettor
On my Stromberg 48 carburettor petrol tends to weep out the three plugs on the bottom of the bowl.
I believe you can buy Nylon washers to replace the thin fibre washers, and some replace the plugs with a hex head ones, because the plugs are awkward to get at with the generator in front. |
03-15-2018, 08:21 PM | #2 |
Senior Member
Join Date: Dec 2010
Location: North of sandy ago, CA.
Posts: 2,064
|
Re: leaking Stromberg carburettor
Ian
file the faces of the three holes flat.Makes it easier to seat the new gaskets. Bruce
__________________
Works good Lasts long time |
Sponsored Links (Register now to hide all advertisements) |
|
03-15-2018, 09:47 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: leaking Stromberg carburettor
The nylon washers work well.
|
03-16-2018, 07:29 AM | #4 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,183
|
Re: leaking Stromberg carburettor
Sponsored Links (Register now to hide all advertisements)
John |
|
|
Sponsored Links (Register now to hide all advertisements) |
|