View Single Post
Old 10-20-2019, 02:50 AM   #6
Randy in ca
Senior Member
 
Randy in ca's Avatar
 
Join Date: May 2010
Posts: 1,655
Default Re: Early V8 axle under Model A front end

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by rustythumb View Post
i thought the perch pin distance was the same from '28-'36.

You are correct. Also the kingpin spacing is the same. As well, axles from 1933 to 1936 are all identical. 1932 axles have a thicker, heavier cross section but otherwise also have the same spacing for kingpins and wishbone attachment as 33-36. Previous suggestions by others that 1935-36 axles are different (either in this thread or the first similar one) are incorrect. These axles are identical to those of 33-34. The fact that 1935-36 have the spring mounted in front of the axle is because the spring perch is an extension of the wishbone, not because there is any difference in the axles themselves.
Randy in ca is offline   Reply With Quote