View Single Post
Old 09-14-2014, 03:34 PM   #2
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
Default Re: Model A Steering box adjustments

Quote:
Originally Posted by 1930 coupe View Post
Your sector and worm gear wears more in the center straight ahead part than the side turning parts. When you adjust the play out of the worn center section, it will get tight and bind at the less worn side turning sections. The only way to fix it is install new sector and worm gears. The new reproduction gears are not perfect and most people wind up with 1/2" to 1" steering wheel play in the straight ahead section, but that is OK and not noticeable when driving.
RIGHT ON! You need a little steering wheel slack, for your "hunting" movements, to compensate for road surface changes. Once, I adjusted Minerva to NO slack, & she'd DART like a JACKRABBIT
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)