Re: spark off of the distributor.
old style points. I saw the spark inside that little tin rod end piece that slips over the ball that sticks out of the distributor. I had my wire from my top plate short out before. the tab of metal the wire is soldered to was making contact with the outer body causing a no spark. My first plan of action is to put some liquid electrical tape on that.
not sure if this is relevant but the spark was orange. the sparks at my points are white blue. I havent checked a plug yet. Ive never checked the spark it has always just fired up.
Last edited by mike657894; 11-25-2019 at 09:18 AM.
|