View Single Post
Old 06-30-2013, 07:10 PM   #8
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,260
Default Re: Need help troubleshooting/timing

John I'm not sure what indents to the hub means, but you can use a stubby Philips screwdriver instead of the pin to locate TDC; they're more sensitive with some of the gears that have a shallow indent.
__________________
Ray Horton, Beaver Chapter, MAFCA, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote