View Single Post
Old 08-18-2019, 11:31 AM   #7
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Upstate NY and western Florida
Posts: 5,111
Default Re: New clutch - should the throw out bearing disengage?

Measure the pedal freeplay. Its how far the pedal moves easily before any resistance is felt. As said, it should be 1.0-1.5".

This is adjusted by changing the length of the linkage between the pedal end and the bell housing shaft arm.

The clutch pedal should return fully on its own.
Patrick L. is offline   Reply With Quote