Thread: Rear Axle Keys
View Single Post
Old 08-11-2017, 08:08 AM   #15
Railcarmover
Senior Member
 
Railcarmover's Avatar
 
Join Date: Apr 2017
Location: Sacramento
Posts: 1,224
Default Re: Rear Axle Keys

To create a locking taper there is a degree difference in angle between the shaft and hub. I respectfully disagree with Mr Wesenberg in this one area,I use anti-seize on tapers and splines,it doesnt alter the locking value of the taper difference and prevent galling during future disassembly.
Railcarmover is offline   Reply With Quote