The Ford Barn - View Single Post - 28-29 model A cab

SeaSlugs · 06-13-2017, 07:24 PM

Pictures are from when I bought the cab a few years ago. Only things I've done is soak and remove every nut and bolt with liquid wrench. Only things left standing are the rear panel and cowl posts and header panel. I have all the pieces besides the gas tank that I plan to use on another cab. I can get better pics very soon of the current state. I do have a near mint lower cowl panel to go with it and a better passenger side door. Needs the typical patch panels, rear cab straightened, seat riser is rotted at the front, and some pitting on the subframe.
****deleted broken photobucket pics - see link to flickr pics below***

06-13-2017, 07:24 PM	#1
SeaSlugs Senior Member Join Date: May 2010 Location: Central, IL Posts: 3,968	28-29 model A cab City: Peoria State: IL Price: 1300.00 Pictures are from when I bought the cab a few years ago. Only things I've done is soak and remove every nut and bolt with liquid wrench. Only things left standing are the rear panel and cowl posts and header panel. I have all the pieces besides the gas tank that I plan to use on another cab. I can get better pics very soon of the current state. I do have a near mint lower cowl panel to go with it and a better passenger side door. Needs the typical patch panels, rear cab straightened, seat riser is rotted at the front, and some pitting on the subframe. **deleted broken photobucket pics - see link to flickr pics below* __________________ 1929 Model AA - Need long splash aprons! Last edited by SeaSlugs; 07-14-2017 at 10:01 AM.