Thread
:
Oil Pan Dipstick Mount Repair
View Single Post
05-05-2019, 03:12 PM
#
3
51 MERC-CT
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Re: Oil Pan Dipstick Mount Repair
I did mine with a 10/32 threaded plate, tack welded to the inside of the pan.
But to fix without welding or pan removal--
What I would consider is using 10/32 or 10/24 Rivnuts with the appropriate gasket to allow for the thickness of the Rivnut.
Drawback--The installer would need a tool to set the nut in the sheet metal pan
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
Last edited by 51 MERC-CT; 05-06-2019 at
08:37 AM
.
51 MERC-CT
View Public Profile
Send a private message to 51 MERC-CT
Find More Posts by 51 MERC-CT