Thread: Stuck engine
View Single Post
Old 11-06-2018, 11:44 AM   #5
Paul Mike
Junior Member
 
Paul Mike's Avatar
 
Join Date: Nov 2017
Location: Arvada, CO
Posts: 17
Default Re: Stuck engine

I freed up a 1907 Model R engine by putting a jack under the crank to keep pressure on it and adding acetone ATF mixture in the cylinders and then used a heat gun to warm the cylinders. It took about 5 days of this and when I went to the garage to warm them again I found it had broken loose and could be turned by hand with the crank.
Paul Mike is offline   Reply With Quote