The Ford Barn - View Single Post

19Fordy · 03-03-2021, 06:42 PM

According to the Motors Repair Manual the crankshaft endplay for the 1952-53 V-8 239 cu. in engine is .004 to .008 in. I would think 1950 engine would be the same.

03-03-2021, 06:42 PM	#4
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,950	Re: how to measure crankshaft end play According to the Motors Repair Manual the crankshaft endplay for the 1952-53 V-8 239 cu. in engine is .004 to .008 in. I would think 1950 engine would be the same. Last edited by 19Fordy; 03-04-2021 at 09:07 PM.