View Single Post
Old 10-19-2019, 03:56 PM   #9
duke36
Senior Member
 
Join Date: Jun 2015
Posts: 1,215
Default Re: Help! Tie rod end install

What length are the springs, approx 1" ?? Maybe too stiff? I have to use a plastic hammer to knock the rods over the balls sometimes. The springs should compress approx. 25% , so if 1 " long, approx. 1/4" on the end plugs as a gauge, tighten with the ability to rotate the rods stiffly by hand and insert the cotter.
duke36 is offline   Reply With Quote